ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 313
DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > CONFLICT REPORT
Write security: 3; Read security: 5

Describes existing conflicts. Potential problems include DLCI unavailable or Voice port already in use.

DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > VOICE COMPRESSION
Write security: 3; Read security: 5

Configures the compression algorithm used on the selected packet voice endpoint. The default

compression algorithm in the FSU and Express 52XX series is G.723.1. Valid codecs for the VCOM

Module include G.723.1 and NETCODER. Valid codecs for the ADPCM-32 Module include G.711 , G.72 6,

and TRANSPARENT. The ADPCM-32 Module will only operate with another ATLAS containing an

ADPCM-32 Module. Both endpoints must agree on the selected compression algorithm.

DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > SILENCE SUPPRESSION
Write security: 3; Read security: 5

Reduces the total system bandwidth load by preventing ATLAS from sending frames containing a special

silence code during periods of silence. Both endpoints must agree to use silence suppression. By default,

silence suppression is DISABLED. To prohibit silence frames from transmitting and to decrease the total

system bandwidth, ENABLE this feature.

DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > SIGNALING METHOD
Write security: 3; Read security: 5

Selects the type of signaling that the remote port is configured to expect. Available options include the

following: E&M IMMEDIATE, E&M WINK, and LOOP START.

DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > DIRECT INWARD DIALING
Write security: 3; Read security: 5

Defines whether or not Direct Inward Dialing (DID) is used by the remote equipment. If DID is enabled,

then the following options must be configured:

DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > DID DIGITS TRANSFERRED
Write security: 3; Read security: 5

Defines the number of digits ATLAS 550 send to the user equipment.This field only displays if DIRECT

INWARD DIALING is ENABLED.
DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > CALLER ID NUMBER
Write security: 3; Read security: 5

Defines the number ATLAS uses to provide Caller ID to the network for outgoing calls sent through this

endpoint. This field only displays if DIRECT INWARD DIALING is set to DISABLED, and USER TERM is selected.

Setting this menu item is optional.

The ADPCM-32 Resource Module will not interoperate with the FSU and Express series

products.