ADTRAN 1200305L1 system manual Displays the name of the packet endpoint

ATLAS 550 System Manual Section 4, User Interface Guide

RESTORE DELAY IN SECONDS

Write security: 3; Read security: 5

The amount of time within which the criteria for switching to backup are reached before service is returned to the primary circuit.

PACKET MANAGER > PACKET ENDPNTS > CONFIG > USAGE

Read security: 5

This field displays a 7-character summary of the references to this link. Each position is populated with a dash (-) or a character indicating the resource represented. The characters are as follows:

1Packet connection in the first dedicated map

2Packet connection in the second dedicated map

3Packet connection in the third dedicated map

4Packet connection in the fourth dedicated map

5Packet connection in the fifth dedicated map

– Reserved and currently not is use

S Used as a Packet Endpoint in the switched dial plan

U Used by one or more packet switch connections or packet voice entries

PACKET MANAGER > PACKET ENDPNTS > TEST

Write security: 3; Read security: 5

Provides menus for controlling options and setting for packet endpoints.

PACKET MANAGER > PACKET ENDPNTS > TEST > ENDPNT NAME

Write security: 3; Read security: 5

Displays the name of the packet endpoint.

PACKET MANAGER > PACKET ENDPNTS > TEST > PROTOCOL

Write security: 3; Read security: 5

Displays the protocol running on the packet endpoint.

PACKET MANAGER > PACKET ENDPNTS > TEST > SUBLINK - FRAME RELAY

Write security: 3; Read security: 5

Displays test menus for the packet endpoint sublinks. The menus vary depending on the protocol. Testing is not supported on TBOP or PPP.

NAME

Read security: 5

Displays the user-defined name for the DLCI.

61200305L1-1F © 2002 ADTRAN, Inc. 205