ADTRAN 1200305L1 Router IP Routes TTL, Clears the Used menu and resets the value to zero

ATLAS 550 System Manual Section 4, User Interface Guide

ROUTER > IP > ROUTES > USED

Read security: 2

Displays the number of times the router has referenced this route.

ROUTER > IP > ROUTES > CLR

Write security: 2; Read security: 2

Clears the USED menu and resets the value to zero.

ROUTER > IP > ROUTES > FLAGS

Read security: 2

Indicates the properties of this routing table entry, composed of the following letters:

H	- route is a host route
G	- route is a gateway route
DR	- route learned dynamically from RIP
I	- route learned from an ICMP redirect
A	- route learned from IARP
P	- route is private and is not advertised with RIP
T	- route is to a triggered port (updated only when table changes)

ROUTER > IP > ROUTES > HOPS

Read security: 2

Displays the number of router hops required to get to the network or host. Ranges from 0 to 16. If set to 16, the route is defined as infinite and cannot be used.

ROUTER > IP > ROUTES > COST

Read security: 2

Displays the total cost of sending a packet to the specified network. Normally, the cost is based on the available bandwidth.

ROUTER > IP > ROUTES > TTL

Read security: 2

Displays the number of seconds until the address is removed from table. A value of 999 means the route is static.

ROUTER > IP > INTERFACES

Write security: 2; Read security: 2

The INTERFACES menu configures and monitors all interfaces connected to the ATLAS router. These include the Ethernet and frame relay DLCIs connected in the PACKET MANAGER/ PACKET CNCTS.

61200305L1-1F © 2002 ADTRAN, Inc. 221