ADTRAN 1200305L1 LOADING A CONFIGURATION USING XMODEM

61200305L1-1F © 2002 ADTRAN, Inc. 345
LOADING A CONFIGURATION USING XMODEM
Introduction
The ATLAS 550 supports configuration uploads from a unit using a VT100 terminal or terminal emulator
(with XMODEM) and the CONTROL IN or CRAFT interface. This DLP provides the steps for a successful
configuration upload using the CONTROL IN or CRAFT port and XMODEM.
Tools and Materials Required
• VT100 terminal or PC with VT100 terminal emulation software
• XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, wear an antistatic discharge wrist strap to prevent damage to electronic
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.