Section 4, User Interface Guide

ATLAS 550 System Manual

 

 

NET POLL RESPONSE TIMEOUT (T392)

Write security: 3; Read security: 5

Determines how long this packet endpoint will wait without receiving a poll before declaring the poll bad.

Ensure that this timer is greater than the T391 on the user side of the UNI; otherwise, erratic behavior will result.

NET POLLS PER STATUS (N391)

Write security: 3; Read security: 5

Sets the number of link integrity polls before a full status is transmitted.

NET BAD EVENTS THRESHOLD (N392)

Write security: 3; Read security: 5

Sets the number of bad polling events that will cause the link to be declared down in N393 polls.

NET EVENT WINDOW SIZE (N393)

Write security: 3; Read security: 5

Defines the number of poll events in each monitored window.

If the number of bad polls reaches N392 in any N393 period, the link will be declared down. When N393 good polls are received, the link will be declared active again.

PACKET MANAGER > PACKET ENDPNTS > CONFIG > CONFIG - PPP

Write security: 3; Read security: 5

Displays the configuration for this packet endpoint.

AUTHENTICATION

Write security: 3; Read security: 5

Contains the Authentication parameters for this endpoint.

RX METHOD

Write security: 3; Read security: 5

These are methods the ATLAS 550 uses to authenticate the peer. NONE is selected when you do not want to authenticate the peer. PAP, CHAP, or EAP is selected when you will allow the peer to be authenticated with one of the listed authentication protocols. In this case, the most secure method will be used first (EAP, then CHAP, then PAP). CHAP or EAP is selected when you will authenticate the peer only using one of the encrypted authentication protocols. EAP is selected when you will authenticate the peer only using the EAP authentication protocol.

198

© 2002 ADTRAN, Inc.

61200305L1-1F

Page 198
Image 198
ADTRAN 1200305L1 system manual Displays the configuration for this packet endpoint