Paradyne FrameSaver DSL Configuring Snmp Traps, Snmp Traps Options 1, Number of Trap Managers

Configuration Options

Configuring SNMP Traps

Select SNMP Traps from the Management and Communication menu to configure SNMP traps when a trap is generated (see Table 4-16).

Main Menu → Configuration → Management and Communication →

SNMP Traps

See Appendix B, SNMP MIBs and Traps, and RMON Alarm Defaults, for trap format standards and special trap features, including RMON-specific traps, and the default settings that will generate RMON-specific SNMP traps.

Table 4-16. SNMP Traps Options (1 of 3)

SNMP Traps

Possible Settings: Enable, Disable

Default Setting: Disable

Determines whether the FrameSaver unit sends trap messages to the currently configured SNMP trap manager(s).

Enable ± Sends trap messages.

Disable ± Does not send trap messages.

Number of Trap Managers

Possible Settings: 1 ± 6

Default Setting: 1

Specifies the number of SNMP management systems that will receive SNMP trap messages from the FrameSaver unit. An NMS IP Address must be configured in the NMS n IP Address configuration option for each trap manager to receive trap messages.

1 ± 6 ± Specifies the number of trap managers (inclusive).

NMS n IP Address

Possible Settings: 001.000.000.000 ± 223.255.255.255, Clear

Default Setting: Clear (000.000.000.000)

Specifies the IP address that identifies the SNMP manager(s) to receive SNMP traps.

Display Conditions ± This option appears for each trap manager specified in the

Number of Trap Managers configuration option.

001.000.000.000 ± 223.255.255.255 ± Adds to or changes the IP address for the trap manager.

Clear ± Fills the NMS IP address with zeros.

9783-A2-GB20-00 July 2000 4-37