Manuals / Paradyne / Computer Equipment / Network Router

Paradyne FrameSaver DSL, 9783 manual Communication Port Options 4, Rip

Models: FrameSaver DSL 9783

1 233

Download 233 pages 22.17 Kb

Page 85

Configuration Options

Table 4-18. Communication Port Options (4 of 4)

RIP

Possible Settings: None, Standard_out

Default Setting: None

Specifies which Routing Information Protocol (RIP) is used to enable routing of management data between devices.

Display Conditions ± This option only appears when Port Use is set to Net Link.

None ± No routing is used.

Standard_out ± The device will send standard RIP messages to communicate routing information about other FrameSaver units in the network. Standard RIP messages received on this link are ignored.

NOTE: The router must be configured to receive RIP on the port connected to the

COM port, configured as the management interface (e.g., Cisco:

config-t, router RIP, int serialx, IP RIP Receive version 1, ctl-z WR).

To create this management interface, make sure that Node or COM port IP Information has been set up (Configuring Node IP Information).

9783-A2-GB20-00

July 2000

4-45

Image 85

Paradyne FrameSaver DSL, 9783 manual Communication Port Options 4, Rip

Contents

FrameSaver DSL Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Options Operation and Maintenance Troubleshooting Setting Up Network Health for FrameSaver Devices Index Purpose and Intended Audience About This GuideDocument Organization Alarm, and other information, as well as troubleshooting Troubleshooting. Provides device problem resolutionTest procedures Setting Up OpenLane for FrameSaver Devices. IdentifiesProduct-Related Documents Conventions Used When viewing this manual online. Click onTo indicate a hyperlink to additional information Highlighted textSystem Overview About the FrameSaver DSL UnitSystem Overview Features FrameSaver DSL Features and Benefits9783-A2-GB20-00 July Benefits Frame Relay DSL ATMFrameSaver DSL Feature Sets Basic Advanced Feature Feature SetBasic Features Maximum Number of PVCs and Management PVCs Supported Advanced SLV Features OpenLane SLM System About the FrameSaver DSL Unit User Interface Basic Operation Logging On ProcedureIf your login was Then Select Main MenuScreen Format Description Screen Work AreasThis is a remote-site unit that supports 8 PVCs and has Keyboard Keys Navigating the ScreensPress Select For the screen Press Enter to Function Function KeysSelecting from a Menu Switching Between Screen AreasEntering Information Selecting a FieldExample User Interface and Basic Operation Configuration Procedures Configuration Menu Basic ConfigurationConfiguration Option Area Description Configuration Option AreasMain Menu → Configuration Accessing and Displaying Configuration OptionsConfiguration → PVC Connections Changing Configuration OptionsSaving Configuration Options Overview Configuration OptionsConfiguration Options Main Menu → Easy Install Using the Easy Install FeatureEasy Install Screen Example TS Access Dlci Easy Install Configuration Options 1TS Access VPI TS Access VCI Easy Install Configuration Options 2Create a Dedicated Network Management Link Ethernet Port Options ScreenEntering System Information Setting the System Clock Setting Up So the Router Can Receive RIPConfiguration → Data Ports → Dlci Records Main Menu → Control → System InformationConfiguring the Overall System Configuration Option TablesMain Menu → Configuration → System → Frame Relay and LMI Configuring Frame Relay and LMI for the SystemSystem Frame Relay and LMI Options 1 LMI BehaviorLMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25 LMI Status Enquiry N1 Possible Settings 1, 2, 3, 4System Frame Relay and LMI Options 2 Service Level Verification Options 1 Configuring Service Level Verification OptionsSLV Timeout Clearing Event Threshold Service Level Verification Options 2SLV Packet Size bytes Main Menu → Configuration → System→ General Configuring General System OptionsTest Timeout General System OptionsConfiguring the Network Interface Configuring the Physical InterfacesMain Menu → Configuration → Network → Physical Network Physical Interface OptionsMain Menu → Configuration → Data Ports → Physical Configuring the User Data PortData Port Physical Interface Options 1 Transmit Clock SourceMonitor DTR Data Port Physical Interface Options 2Port DTE Initiated Loopbacks Main Menu → Configuration → Data Ports → Frame Relay Configuring Frame Relay for the Data PortData Port Frame Relay Options 1 LMI ParametersData Port Frame Relay Options 2 Main Menu → Configuration → Network → ATM Configuring ATM for the Network InterfaceCell Delineation Error Event Threshold Network ATM OptionsDlci Record Options 1 Configuring Circuit and Dlci RecordsDlci Number VPI,VCI Number VPIDlci Record Options 2 Dlci Type Possible Settings Standard, MultiplexedCIR bps Committed Burst Size Bc BitsExcess Burst Size Bits Dlci Record Options 3Dlci Priority Outbound Management PriorityMain Menu → Configuration → PVC Connections Configuring PVC Connections10. PVC Connection Options 1 Destination Link 10. PVC Connection Options 2Destination Dlci Destination EdlciConfiguring Node IP Information Setting Up Management and Communication Options11. Node IP Options 1 11. Node IP Options 2 11. Node IP Options 3 TS Access Management Link12. Management PVC Options 1 Configuring Management PVCsName 12. Management PVC Options 2 Primary Link Possible Settings Net1-FR1, Port-1, ClearSet DE Primary Dlci 12. Management PVC Options 3Primary Edlci Name 1 Access Configuring General Snmp Management13. General Snmp Management Options 1 Snmp Management13. General Snmp Management Options 2 Name 2 AccessTelnet Login Required Configuring Telnet and/or FTP Session Support14. Telnet and FTP Session Options 1 Telnet Session14. Telnet and FTP Session Options 2 Inactivity TimeoutDisconnect Time Minutes 14. Telnet and FTP Session Options 3 FTP Login RequiredFTP Session FTP Max Transfer Rate KbpsAccess Type Configuring Snmp NMS Security15. Snmp NMS Security Options NMS IP Validation16. Snmp Traps Options 1 Configuring Snmp TrapsSnmp Traps Number of Trap ManagersEnterprise Specific Traps 16. Snmp Traps Options 216. Snmp Traps Options 3 Link Traps Possible Settings Disable, Up, Down, BothLink Traps Interfaces Rmon Traps17. Ethernet Port Options 1 Configuring the Ethernet PortInterface Status Proxy ARP 17. Ethernet Port Options 218. Communication Port Options 1 Configuring the Communication PortPort Use Character Length18. Communication Port Options 2 Login RequiredStop Bits Ignore Control Leads18. Communication Port Options 3 RIP 18. Communication Port Options 4External Modem Commands Configuring the COM Port to Support an External ModemDial-In Access 19. External Modem COM Port OptionsSecurity and Logins Controlling Asynchronous Terminal Access Limiting AccessSet the configuration option Controlling Telnet or FTP Access Controlling External COM Port Device AccessLimiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Disabling Snmp Access Controlling Snmp AccessAssigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Main Menu → Control → Administer Logins Creating a LoginField Enter Deleting a Login Modifying a LoginOperation and Maintenance Main Menu → Status → Identity Displaying System InformationView this field To find Main Menu → Status → Display LEDs and Control Leads Viewing LEDs and Control LeadsDisplay LEDs & Control Leads Screen General Status LEDs 1 Label Indication Color What It Means LED DescriptionsUser Data Port LED Label Indication Color What It Means Network Interface LEDs Label Indication Color What It MeansAdditional Control Leads Label Indication What It Means Control Lead DescriptionsNetwork Interface User Data PortDevice Messages 1 What It Indicates What To Do Device MessagesSee Changing Software Device Messages 2 What It Indicates What To DoDevice Messages 3 What It Indicates What To Do See Upgrading System Device Messages 4 What It Indicates What To DoDevice Messages 5 What It Indicates What To Do Reset COM PortStatus Menu Status InformationSelf-Test Results Messages Last System Reset Date and Time Last System Reset Date and TimeSystem and Test Status Messages Self-Test Results MessagesHealth and Status Messages 1 What It Indicates Health and Status MessagesFrame relay link Health and Status Messages 2 What It IndicatesFrame relay link 1, 2 Health and Status Messages 3 What It IndicatesTest Status Messages 1 What It Indicates Test Status MessagesSend Pttn Active, Interface Test Status Messages 2 What It IndicatesMain Menu → Status → PVC Connection Status PVC Connection StatusPVC Connection Status Screen Example PVC Connection Status 1 FieldPVC Connection Status 2 Field What It Indicates Main Menu → Status → Network Interface Status Network Interface StatusNetwork Interface Status Screen Example 10. Network Interface Status Field What It IndicatesMain Menu → Status → IP Routing Table IP Routing TableIP Routing Table Screen Example 11. IP Routing Table Values Column What It Indicates Main Menu → Status → Performance Statistics Performance StatisticsPerformance Statistics Menu Performance Statistics → Clear All Statistics Clearing Performance StatisticsPerformance Statistics → Frame Relay Performance Statistics → ESF LineService Level Verification Performance Statistics Average round trip latency is measured every SLV sampling Main Menu → Status → Performance Statistics → Dlci Dlci Performance Statistics13. Dlci Performance Statistics 1 What It Indicates CIR&EIR 13. Dlci Performance Statistics 2 What It IndicatesFrame Relay Performance Statistics Frame Relay ErrorsMain Menu → Status → Performance Statistics → Frame Relay 14. Frame Relay Performance Statistics 1 What It IndicatesFrame Relay Hdlc Errors Frame Relay Errors contd14. Frame Relay Performance Statistics 2 What It Indicates Frame Relay LMIMain Menu → Status → Performance Statistics → ATM ATM Performance Statistics15. ATM Performance Statistics 1 What It Indicates TC Sublayer15. ATM Performance Statistics 2 What It Indicates Main Menu → Status → Performance Statistics → Ethernet Ethernet Performance StatisticsStatistic What It Indicates Main Menu → Status → Trap Event Log Trap Event LogTrap Event Log Screen Example Operation and Maintenance FTP Operation FTP File Transfers Dir directory Command DefinitionIf the message displayed is Then Upgrading System SoftwareChanging Software Determining Whether a Download Is CompletedIf retrieving Then Transferring Collected DataTroubleshooting Indicators See Problem IndicatorsResetting the Unit from the Control Menu Resetting the Unit and Restoring CommunicationResetting the Unit By Cycling the Power If selecting Following occurs Restoring Communication with an Improperly Configured UnitLMI Packet Capture Utility Feature Troubleshooting Management Link FeatureMain Menu → Control → LMI Packet Capture Utility LMI Trace Log Example LMI Packet Capture Utility → Display LMI Trace LogAlarm Conditions 1 What It Indicates What To Do AlarmsAlarm Conditions 2 What It Indicates What To Do Alarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Device Problems Troubleshooting TablesSee Trap Event Log in , Operation and Maintenance Device Problems 1 Symptom Possible Cause SolutionsUnit Device Problems 2 Symptom Possible Cause SolutionsATM Problems Symptom Possible Cause Solutions ATM ProblemsFrame Relay PVC Problems Symptom Possible Cause Solutions Frame Relay PVC ProblemsTest Menu Example Tests AvailableWhen the status of a test is Only command available is Test Timeout FeatureStarting and Stopping a Test Active Aborting All TestsPVC Tests Screen Example PVC TestsSend Pattern PVC LoopbackMain Menu → Test → Network PVC Tests Main Menu → Test → Data Port PVC TestsConnectivity Monitor PatternMain Menu → Test → Data Port Physical Tests DTE LoopbackMain Menu → Test → IP Ping IP Ping TestProcedure Main Menu → Test → Lamp Test Lamp TestOpenLane Support of FrameSaver Devices Setting Up OpenLane for FrameSaver DevicesOpenLane Support of FrameSaver Devices Setting Up the OpenLane SLM System Setting Up FrameSaver and SLV Support Setting Up OpenLane for FrameSaver Devices 10-1 Setting Up Network Health for FrameSaver DevicesInstallation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports Generating Reports for a Group About Service Level ReportsAbout At-a-Glance Reports About Trend Reports Reports Applicable to FrameSaver SLV DevicesPrinted Reports 10-8 10-9 10-10 Menus Menu HierarchyStatus Menu Hierarchy Frame Relay ModeControl Easy InstallMenu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults Downloading MIBs and Snmp Traps MIB SupportFrameSaver Units sysDescr system System Group mib-2FrameSaver Units sysObjectID system Paradyne Indexes to the Interface Table ifTable Interfaces Group mib-2Physical Layer Frame Relay Logical LayerRmon Logical Layer NetScout Indexes to the Interface Table ifTableExamples Standards Compliance for Snmp TrapsTrap warmStart Trap authenticationFailureTable B-3. warmStart Trap What It Indicates Possible Cause Variable-BindingTraps linkUp and linkDown Sample strings Physical SublayerInterface Variable-Bindings Possible Cause Table B-6. linkUp and linkDown Variable-Bindings 2ATM Logical Link Sublayer DevHealthAndStatus Traps enterprise-SpecificSLVs devFrExt.mib Placeholder Traps RMON-Specific Event Defaults Rmon Alarm and Event DefaultsEventIndex EventDescription EventType Rising Event OperationPhysical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults MIB FR DTE MIB Dlci Alarm Defaults ± Paradyne AreaFrames Sent Snmp MIBs and Traps, and Rmon Alarm Defaults Object ID Cross-References Numeric Order 6.1.2.1.2.10.32.2.1 6.1.2.1.2.2.16.1.4.1.1795.2.24.2 Dlci CIR 6.1.4.1.1795.2.24.2.6.9.46.1.4.1.1795.2.24.2.6.9.4.4.2 Dlci EIR6.1.4.1.1795.2.24.2.6.9.4.7.1 6.1.4.1.1795.2.24.2.6.9.4.5.2.16.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Rear Panel Connectors, Cables, Pin AssignmentsDSL Network Interface Cable Figure C-1. DSL Network Interface Cable with RJ48C ConnectorSignal Direction Pin # COM Port ConnectorPin Standard EIA-232-D Crossover CableAT Command String To configure the modem to Standard V.35 Straight-through Cable Data Port ConnectorDirection Pin Socket Ethernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications DSL Network Interface COM PortEthernet Port Data PortFrameSaver SLV Upgrade Model / Feature NumberEquipment List EquipmentDescription Part Number Feature Number Description Model / Feature NumberOptional Features CablesNumbers IndexIN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9