Feature Set, Basic Advanced Feature | Paradyne FrameSaver DSL, 9783

About the FrameSaver DSL Unit

To obtain an activation certificate, provide the model number (9783), your OpenLane system license key number, and the number of FrameSaver units whose SLV capability is to be activated. When you receive your certificate, it will include an Activation Certificate number, the Feature Group Number for the additional SLV features (Feature Group 2), your OpenLane license key number, and the number of device activations (license keys) ordered.

When ready to activate SLV capability in the unit(s), run the OpenLane SLM application. It will prompt you for the serial numbers of the units to be activated, their IP addresses, and whether the activations will be immediate or scheduled. OpenLane then activates SLV capability in the designated units and the units are reset. A report summary will be available that provides information about

the activation certificate, the activated units, and the number of license keys remaining.

The following table summarizes the features that are included in the two feature sets. See Basic Features and Advanced SLV Features for additional information.

	Feature Set

	Basic	Advanced
Feature	Basic	SLV

Frame relay performance statistics	Yes	Yes

SLV performance statistics	No	Yes
(e.g., FDR/DDR, latency, CIR/EIR relationships)

Trap Log	Yes	Yes

Multiplexed user data DLCIs	No	Yes

Troubleshooting DLCI for remote management	Yes	Yes

Layer 2 (data link) diagnostics	Yes	Yes
(nondisruptive DLCI loopbacks)

PVC Burst Table	Yes	Yes

User history available via SNMP RMON2 polling	Yes	Yes

User history available via FTP	No	Yes

RMON alarms and proactive alarm thresholds	No	Yes

OpenLane SLM system real-time applications	Limited	Yes
	(no SLM)

OpenLane SLM system historical reports and graphs	No	Yes

NetScout Manager Plus support	Alarms and	Alarms and
	history	history

9783-A2-GB20-00

July 2000

1-7

Image 19

Paradyne FrameSaver DSL, 9783 manual Feature Set, Basic Advanced Feature

Contents

FrameSaver DSL Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Options Operation and Maintenance Troubleshooting Setting Up Network Health for FrameSaver Devices Index Purpose and Intended Audience About This GuideDocument Organization Setting Up OpenLane for FrameSaver Devices. Identifies Troubleshooting. Provides device problem resolutionAlarm, and other information, as well as troubleshooting Test procedures Product-Related Documents Highlighted text When viewing this manual online. Click onConventions Used To indicate a hyperlink to additional information System Overview About the FrameSaver DSL UnitSystem Overview Features FrameSaver DSL Features and Benefits 9783-A2-GB20-00 July Benefits Frame Relay DSL ATM FrameSaver DSL Feature Sets Basic Advanced Feature Feature Set Basic Features Maximum Number of PVCs and Management PVCs Supported Advanced SLV Features OpenLane SLM System About the FrameSaver DSL Unit User Interface Basic Operation Logging On Procedure If your login was Then Select Main Menu Screen Format Description Screen Work AreasThis is a remote-site unit that supports 8 PVCs and has Keyboard Keys Navigating the ScreensPress Select For the screen Press Enter to Function Function Keys Selecting from a Menu Switching Between Screen Areas Entering Information Selecting a FieldExample User Interface and Basic Operation Configuration Procedures Configuration Menu Basic Configuration Configuration Option Area Description Configuration Option Areas Main Menu → Configuration Accessing and Displaying Configuration Options Configuration → PVC Connections Changing Configuration Options Saving Configuration Options Overview Configuration Options Configuration Options Main Menu → Easy Install Using the Easy Install FeatureEasy Install Screen Example TS Access Dlci Easy Install Configuration Options 1TS Access VPI Ethernet Port Options Screen Easy Install Configuration Options 2TS Access VCI Create a Dedicated Network Management Link Main Menu → Control → System Information Setting Up So the Router Can Receive RIPEntering System Information Setting the System Clock Configuration → Data Ports → Dlci Records Configuring the Overall System Configuration Option Tables LMI Behavior Configuring Frame Relay and LMI for the SystemMain Menu → Configuration → System → Frame Relay and LMI System Frame Relay and LMI Options 1 LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25 LMI Status Enquiry N1 Possible Settings 1, 2, 3, 4System Frame Relay and LMI Options 2 Service Level Verification Options 1 Configuring Service Level Verification Options SLV Timeout Clearing Event Threshold Service Level Verification Options 2SLV Packet Size bytes General System Options Configuring General System OptionsMain Menu → Configuration → System→ General Test Timeout Network Physical Interface Options Configuring the Physical InterfacesConfiguring the Network Interface Main Menu → Configuration → Network → Physical Transmit Clock Source Configuring the User Data PortMain Menu → Configuration → Data Ports → Physical Data Port Physical Interface Options 1 Monitor DTR Data Port Physical Interface Options 2Port DTE Initiated Loopbacks LMI Parameters Configuring Frame Relay for the Data PortMain Menu → Configuration → Data Ports → Frame Relay Data Port Frame Relay Options 1 Data Port Frame Relay Options 2 Network ATM Options Configuring ATM for the Network InterfaceMain Menu → Configuration → Network → ATM Cell Delineation Error Event Threshold VPI,VCI Number VPI Configuring Circuit and Dlci RecordsDlci Record Options 1 Dlci Number Committed Burst Size Bc Bits Dlci Type Possible Settings Standard, MultiplexedDlci Record Options 2 CIR bps Outbound Management Priority Dlci Record Options 3Excess Burst Size Bits Dlci Priority Main Menu → Configuration → PVC Connections Configuring PVC Connections10. PVC Connection Options 1 Destination Edlci 10. PVC Connection Options 2Destination Link Destination Dlci Configuring Node IP Information Setting Up Management and Communication Options 11. Node IP Options 1 11. Node IP Options 2 11. Node IP Options 3 TS Access Management Link 12. Management PVC Options 1 Configuring Management PVCsName 12. Management PVC Options 2 Primary Link Possible Settings Net1-FR1, Port-1, ClearSet DE Primary Dlci 12. Management PVC Options 3Primary Edlci Snmp Management Configuring General Snmp ManagementName 1 Access 13. General Snmp Management Options 1 13. General Snmp Management Options 2 Name 2 Access Telnet Session Configuring Telnet and/or FTP Session SupportTelnet Login Required 14. Telnet and FTP Session Options 1 14. Telnet and FTP Session Options 2 Inactivity TimeoutDisconnect Time Minutes FTP Max Transfer Rate Kbps FTP Login Required14. Telnet and FTP Session Options 3 FTP Session NMS IP Validation Configuring Snmp NMS SecurityAccess Type 15. Snmp NMS Security Options Number of Trap Managers Configuring Snmp Traps16. Snmp Traps Options 1 Snmp Traps Enterprise Specific Traps 16. Snmp Traps Options 2 Rmon Traps Link Traps Possible Settings Disable, Up, Down, Both16. Snmp Traps Options 3 Link Traps Interfaces 17. Ethernet Port Options 1 Configuring the Ethernet PortInterface Status Proxy ARP 17. Ethernet Port Options 2 Character Length Configuring the Communication Port18. Communication Port Options 1 Port Use Ignore Control Leads Login Required18. Communication Port Options 2 Stop Bits 18. Communication Port Options 3 RIP 18. Communication Port Options 4 19. External Modem COM Port Options Configuring the COM Port to Support an External ModemExternal Modem Commands Dial-In Access Security and Logins Controlling Asynchronous Terminal Access Limiting Access Set the configuration option Controlling Telnet or FTP Access Controlling External COM Port Device Access Limiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Disabling Snmp Access Controlling Snmp Access Assigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Main Menu → Control → Administer Logins Creating a LoginField Enter Deleting a Login Modifying a Login Operation and Maintenance Main Menu → Status → Identity Displaying System InformationView this field To find Main Menu → Status → Display LEDs and Control Leads Viewing LEDs and Control LeadsDisplay LEDs & Control Leads Screen General Status LEDs 1 Label Indication Color What It Means LED Descriptions User Data Port LED Label Indication Color What It Means Network Interface LEDs Label Indication Color What It Means User Data Port Control Lead DescriptionsAdditional Control Leads Label Indication What It Means Network Interface Device Messages 1 What It Indicates What To Do Device Messages See Changing Software Device Messages 2 What It Indicates What To Do Device Messages 3 What It Indicates What To Do See Upgrading System Device Messages 4 What It Indicates What To Do Device Messages 5 What It Indicates What To Do Reset COM Port Status Menu Status Information Self-Test Results Messages Last System Reset Date and TimeSelf-Test Results Messages Last System Reset Date and Time System and Test Status Messages Health and Status Messages 1 What It Indicates Health and Status Messages Frame relay link Health and Status Messages 2 What It Indicates Frame relay link 1, 2 Health and Status Messages 3 What It Indicates Test Status Messages 1 What It Indicates Test Status Messages Send Pttn Active, Interface Test Status Messages 2 What It Indicates PVC Connection Status 1 Field PVC Connection StatusMain Menu → Status → PVC Connection Status PVC Connection Status Screen Example PVC Connection Status 2 Field What It Indicates 10. Network Interface Status Field What It Indicates Network Interface StatusMain Menu → Status → Network Interface Status Network Interface Status Screen Example Main Menu → Status → IP Routing Table IP Routing TableIP Routing Table Screen Example 11. IP Routing Table Values Column What It Indicates Main Menu → Status → Performance Statistics Performance StatisticsPerformance Statistics Menu Performance Statistics → ESF Line Clearing Performance StatisticsPerformance Statistics → Clear All Statistics Performance Statistics → Frame Relay Service Level Verification Performance Statistics Average round trip latency is measured every SLV sampling Main Menu → Status → Performance Statistics → Dlci Dlci Performance Statistics13. Dlci Performance Statistics 1 What It Indicates CIR&EIR 13. Dlci Performance Statistics 2 What It Indicates 14. Frame Relay Performance Statistics 1 What It Indicates Frame Relay ErrorsFrame Relay Performance Statistics Main Menu → Status → Performance Statistics → Frame Relay Frame Relay LMI Frame Relay Errors contdFrame Relay Hdlc Errors 14. Frame Relay Performance Statistics 2 What It Indicates TC Sublayer ATM Performance StatisticsMain Menu → Status → Performance Statistics → ATM 15. ATM Performance Statistics 1 What It Indicates 15. ATM Performance Statistics 2 What It Indicates Main Menu → Status → Performance Statistics → Ethernet Ethernet Performance StatisticsStatistic What It Indicates Main Menu → Status → Trap Event Log Trap Event LogTrap Event Log Screen Example Operation and Maintenance FTP Operation FTP File Transfers Dir directory Command Definition If the message displayed is Then Upgrading System Software Changing Software Determining Whether a Download Is Completed If retrieving Then Transferring Collected Data Troubleshooting Indicators See Problem Indicators Resetting the Unit from the Control Menu Resetting the Unit and Restoring CommunicationResetting the Unit By Cycling the Power If selecting Following occurs Restoring Communication with an Improperly Configured Unit LMI Packet Capture Utility Feature Troubleshooting Management Link FeatureMain Menu → Control → LMI Packet Capture Utility LMI Trace Log Example LMI Packet Capture Utility → Display LMI Trace Log Alarm Conditions 1 What It Indicates What To Do Alarms Alarm Conditions 2 What It Indicates What To Do Alarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Device Problems 1 Symptom Possible Cause Solutions Troubleshooting TablesDevice Problems See Trap Event Log in , Operation and Maintenance Unit Device Problems 2 Symptom Possible Cause Solutions ATM Problems Symptom Possible Cause Solutions ATM Problems Frame Relay PVC Problems Symptom Possible Cause Solutions Frame Relay PVC Problems Test Menu Example Tests Available When the status of a test is Only command available is Test Timeout FeatureStarting and Stopping a Test Active Aborting All Tests PVC Tests Screen Example PVC Tests Main Menu → Test → Data Port PVC Tests PVC LoopbackSend Pattern Main Menu → Test → Network PVC Tests Connectivity Monitor Pattern Main Menu → Test → Data Port Physical Tests DTE Loopback Main Menu → Test → IP Ping IP Ping Test Procedure Main Menu → Test → Lamp Test Lamp Test OpenLane Support of FrameSaver Devices Setting Up OpenLane for FrameSaver DevicesOpenLane Support of FrameSaver Devices Setting Up the OpenLane SLM System Setting Up FrameSaver and SLV Support Setting Up OpenLane for FrameSaver Devices 10-1 Setting Up Network Health for FrameSaver Devices Installation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports Generating Reports for a Group About Service Level ReportsAbout At-a-Glance Reports About Trend Reports Reports Applicable to FrameSaver SLV DevicesPrinted Reports 10-8 10-9 10-10 Menus Menu Hierarchy Status Menu Hierarchy Frame Relay Mode Control Easy Install Menu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults Downloading MIBs and Snmp Traps MIB Support FrameSaver Units sysDescr system System Group mib-2FrameSaver Units sysObjectID system Frame Relay Logical Layer Interfaces Group mib-2Paradyne Indexes to the Interface Table ifTable Physical Layer Rmon Logical Layer NetScout Indexes to the Interface Table ifTable Examples Standards Compliance for Snmp Traps Variable-Binding Trap authenticationFailureTrap warmStart Table B-3. warmStart Trap What It Indicates Possible Cause Traps linkUp and linkDown Sample strings Physical Sublayer Interface Variable-Bindings Possible Cause Table B-6. linkUp and linkDown Variable-Bindings 2 ATM Logical Link Sublayer DevHealthAndStatus Traps enterprise-Specific SLVs devFrExt.mib Placeholder Traps RMON-Specific Rising Event Operation Rmon Alarm and Event DefaultsEvent Defaults EventIndex EventDescription EventType Physical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults MIB FR DTE MIB Dlci Alarm Defaults ± Paradyne Area Frames Sent Snmp MIBs and Traps, and Rmon Alarm Defaults Object ID Cross-References Numeric Order 6.1.2.1.2.10.32.2.1 6.1.2.1.2.2.16.1.4.1.1795.2.24.2 Dlci CIR 6.1.4.1.1795.2.24.2.6.9.4 6.1.4.1.1795.2.24.2.6.9.4.4.2 Dlci EIR 6.1.4.1.1795.2.24.2.6.9.4.7.1 6.1.4.1.1795.2.24.2.6.9.4.5.2.1 6.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Rear Panel Connectors, Cables, Pin Assignments DSL Network Interface Cable Figure C-1. DSL Network Interface Cable with RJ48C Connector Signal Direction Pin # COM Port Connector Pin Standard EIA-232-D Crossover Cable AT Command String To configure the modem to Standard V.35 Straight-through Cable Data Port ConnectorDirection Pin Socket Ethernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications Data Port COM PortDSL Network Interface Ethernet Port Equipment Model / Feature NumberFrameSaver SLV Upgrade Equipment List Cables Description Model / Feature NumberDescription Part Number Feature Number Optional Features Numbers Index IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9