Paradyne FrameSaver DSL, 9783 manual Easy Install Configuration Options 2, TS Access VCI

Configuration Options

Table 4-1. Easy Install Configuration Options (2 of 2)

TS Access (VCI)

Possible Settings: 32±255

Default Setting: 0

Specifies the VCI on the network interface to be used for troubleshooting by the service provider. VPI 0, VCI 35 is the default management path between the FrameSaver DSL unit and the Hotwire GranDSLAM.

32 ± 255 ± Specifies the VCI.

Create a Dedicated Network Management Link

With the cursor on the Create a Dedicated Network Management Link field, press Enter. When prompted, enter a DLCI for the link from 16 to 1007. The management link DLCI is added or modified.

Ethernet Port Options Screen

With the cursor on the Ethernet Port Options Screen field, press Enter. The Ethernet Port Options screen appears. See Configuring the Ethernet Port on page 4-40.

After configuring the Ethernet port configuration options, save your changes. Then press the Esc key to return to the Easy Install screen.

Network 1 DSL Line Rate (Kbps)

Possible Settings: AutoRate, 144, 192, 272, 384, 400, 528, 768, 1168, 1552, 2320

Default Setting: AutoRate

Determines whether the rate on the DSL interface is automatically detected using the Conexant AutoBaud algorithm, or set to a specific value.

144 ± 2320 ± The DSL line rate is set to the specified value.

AutoRate ± The DSL line rate is automatically detected from the DSL interface.

9783-A2-GB20-00 July 2000 4-5