Configuring Circuit and Dlci Records | Paradyne FrameSaver DSL

Configuration Options

Configuring Circuit and DLCI Records

Circuit and DLCI records can be created and modified, and PVCs created based on existing DLCIs, using the Network Circuit Records screen and the Data Ports DLCI Records screen:

Main Menu → Configuration → Network → Circuit Records

Main Menu → Configuration → Data Port → DLCI Records

Table 4-9. DLCI Record Options (1 of 3)

DLCI Number

Possible Settings: 16 ± 1007

Default Setting: Initially blank; no default.

Specifies the number for the DLCI in the DLCI record. The parameter determines which DLCI record is used for transferring data on a particular frame relay interface. DLCI numbers range from 0 to 1023. However, the numbers 0 to15 and 1008 to 1023 are reserved. Entry of an invalid number results in the error message Value Out of Range (16 ± 1007). If the DLCI number is part of a connection, this field is read-only.

NOTES: ± If a DLCI number is not entered, the DLCI record is not created.

±The DLCI number entered must be unique for the interface.

±Changing settings for this configuration option causes the FrameSaver unit to abort any active frame relay tests.

16 ± 1007 ± Specifies the DLCI number (inclusive).

VPI,VCI Number (VPI)

Possible Settings: 0 ± 15

Default Setting: Initially blank; no default.

Specifies the VPI. Entry of an invalid number results in the error message Value Out of Range (0 ± 15). The VPI/VCI must be unique on the ATM link.

Display Conditions ± This option does not appear for the user data port.

0 ± 15 ± Specifies the VPI.

VPI,VCI Number (VCI)

Possible Settings: 32 ± 255

Default Setting: Initially blank; no default.

Specifies the VCI. Entry of an invalid number results in the error message Value Out of Range (32 ± 255). The VPI/VCI must be unique on the ATM link.

Display Conditions ± This option does not appear for the user data port.

32 ± 255 ± Specifies the VCI.

9783-A2-GB20-00

July 2000

4-19

Image 59

Paradyne FrameSaver DSL, 9783 Configuring Circuit and Dlci Records, Dlci Record Options 1, Dlci Number, VPI,VCI Number VPI

Contents

FrameSaver DSL Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Options Operation and Maintenance Troubleshooting Setting Up Network Health for FrameSaver Devices Index Document Organization About This GuidePurpose and Intended Audience Setting Up OpenLane for FrameSaver Devices. Identifies Troubleshooting. Provides device problem resolutionAlarm, and other information, as well as troubleshooting Test procedures Product-Related Documents Highlighted text When viewing this manual online. Click onConventions Used To indicate a hyperlink to additional information System Overview About the FrameSaver DSL UnitSystem Overview Features FrameSaver DSL Features and Benefits 9783-A2-GB20-00 July Benefits Frame Relay DSL ATM FrameSaver DSL Feature Sets Basic Advanced Feature Feature Set Basic Features Maximum Number of PVCs and Management PVCs Supported Advanced SLV Features OpenLane SLM System About the FrameSaver DSL Unit User Interface Basic Operation Logging On Procedure If your login was Then Select Main Menu This is a remote-site unit that supports 8 PVCs and has Screen Work AreasScreen Format Description Press Navigating the ScreensKeyboard Keys Select For the screen Press Enter to Function Function Keys Selecting from a Menu Switching Between Screen Areas Example Selecting a FieldEntering Information User Interface and Basic Operation Configuration Procedures Configuration Menu Basic Configuration Configuration Option Area Description Configuration Option Areas Main Menu → Configuration Accessing and Displaying Configuration Options Configuration → PVC Connections Changing Configuration Options Saving Configuration Options Overview Configuration Options Configuration Options Easy Install Screen Example Using the Easy Install FeatureMain Menu → Easy Install TS Access VPI Easy Install Configuration Options 1TS Access Dlci Ethernet Port Options Screen Easy Install Configuration Options 2TS Access VCI Create a Dedicated Network Management Link Main Menu → Control → System Information Setting Up So the Router Can Receive RIPEntering System Information Setting the System Clock Configuration → Data Ports → Dlci Records Configuring the Overall System Configuration Option Tables LMI Behavior Configuring Frame Relay and LMI for the SystemMain Menu → Configuration → System → Frame Relay and LMI System Frame Relay and LMI Options 1 System Frame Relay and LMI Options 2 LMI Status Enquiry N1 Possible Settings 1, 2, 3, 4LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25 Service Level Verification Options 1 Configuring Service Level Verification Options SLV Packet Size bytes Service Level Verification Options 2SLV Timeout Clearing Event Threshold General System Options Configuring General System OptionsMain Menu → Configuration → System→ General Test Timeout Network Physical Interface Options Configuring the Physical InterfacesConfiguring the Network Interface Main Menu → Configuration → Network → Physical Transmit Clock Source Configuring the User Data PortMain Menu → Configuration → Data Ports → Physical Data Port Physical Interface Options 1 Port DTE Initiated Loopbacks Data Port Physical Interface Options 2Monitor DTR LMI Parameters Configuring Frame Relay for the Data PortMain Menu → Configuration → Data Ports → Frame Relay Data Port Frame Relay Options 1 Data Port Frame Relay Options 2 Network ATM Options Configuring ATM for the Network InterfaceMain Menu → Configuration → Network → ATM Cell Delineation Error Event Threshold VPI,VCI Number VPI Configuring Circuit and Dlci RecordsDlci Record Options 1 Dlci Number Committed Burst Size Bc Bits Dlci Type Possible Settings Standard, MultiplexedDlci Record Options 2 CIR bps Outbound Management Priority Dlci Record Options 3Excess Burst Size Bits Dlci Priority 10. PVC Connection Options 1 Configuring PVC ConnectionsMain Menu → Configuration → PVC Connections Destination Edlci 10. PVC Connection Options 2Destination Link Destination Dlci Configuring Node IP Information Setting Up Management and Communication Options 11. Node IP Options 1 11. Node IP Options 2 11. Node IP Options 3 TS Access Management Link Name Configuring Management PVCs12. Management PVC Options 1 Set DE Primary Link Possible Settings Net1-FR1, Port-1, Clear12. Management PVC Options 2 Primary Edlci 12. Management PVC Options 3Primary Dlci Snmp Management Configuring General Snmp ManagementName 1 Access 13. General Snmp Management Options 1 13. General Snmp Management Options 2 Name 2 Access Telnet Session Configuring Telnet and/or FTP Session SupportTelnet Login Required 14. Telnet and FTP Session Options 1 Disconnect Time Minutes Inactivity Timeout14. Telnet and FTP Session Options 2 FTP Max Transfer Rate Kbps FTP Login Required14. Telnet and FTP Session Options 3 FTP Session NMS IP Validation Configuring Snmp NMS SecurityAccess Type 15. Snmp NMS Security Options Number of Trap Managers Configuring Snmp Traps16. Snmp Traps Options 1 Snmp Traps Enterprise Specific Traps 16. Snmp Traps Options 2 Rmon Traps Link Traps Possible Settings Disable, Up, Down, Both16. Snmp Traps Options 3 Link Traps Interfaces Interface Status Configuring the Ethernet Port17. Ethernet Port Options 1 Proxy ARP 17. Ethernet Port Options 2 Character Length Configuring the Communication Port18. Communication Port Options 1 Port Use Ignore Control Leads Login Required18. Communication Port Options 2 Stop Bits 18. Communication Port Options 3 RIP 18. Communication Port Options 4 19. External Modem COM Port Options Configuring the COM Port to Support an External ModemExternal Modem Commands Dial-In Access Security and Logins Controlling Asynchronous Terminal Access Limiting Access Set the configuration option Controlling Telnet or FTP Access Controlling External COM Port Device Access Limiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Disabling Snmp Access Controlling Snmp Access Assigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Field Enter Creating a LoginMain Menu → Control → Administer Logins Deleting a Login Modifying a Login Operation and Maintenance View this field To find Displaying System InformationMain Menu → Status → Identity Display LEDs & Control Leads Screen Viewing LEDs and Control LeadsMain Menu → Status → Display LEDs and Control Leads General Status LEDs 1 Label Indication Color What It Means LED Descriptions User Data Port LED Label Indication Color What It Means Network Interface LEDs Label Indication Color What It Means User Data Port Control Lead DescriptionsAdditional Control Leads Label Indication What It Means Network Interface Device Messages 1 What It Indicates What To Do Device Messages See Changing Software Device Messages 2 What It Indicates What To Do Device Messages 3 What It Indicates What To Do See Upgrading System Device Messages 4 What It Indicates What To Do Device Messages 5 What It Indicates What To Do Reset COM Port Status Menu Status Information Self-Test Results Messages Last System Reset Date and TimeSelf-Test Results Messages Last System Reset Date and Time System and Test Status Messages Health and Status Messages 1 What It Indicates Health and Status Messages Frame relay link Health and Status Messages 2 What It Indicates Frame relay link 1, 2 Health and Status Messages 3 What It Indicates Test Status Messages 1 What It Indicates Test Status Messages Send Pttn Active, Interface Test Status Messages 2 What It Indicates PVC Connection Status 1 Field PVC Connection StatusMain Menu → Status → PVC Connection Status PVC Connection Status Screen Example PVC Connection Status 2 Field What It Indicates 10. Network Interface Status Field What It Indicates Network Interface StatusMain Menu → Status → Network Interface Status Network Interface Status Screen Example IP Routing Table Screen Example IP Routing TableMain Menu → Status → IP Routing Table 11. IP Routing Table Values Column What It Indicates Performance Statistics Menu Performance StatisticsMain Menu → Status → Performance Statistics Performance Statistics → ESF Line Clearing Performance StatisticsPerformance Statistics → Clear All Statistics Performance Statistics → Frame Relay Service Level Verification Performance Statistics Average round trip latency is measured every SLV sampling 13. Dlci Performance Statistics 1 What It Indicates Dlci Performance StatisticsMain Menu → Status → Performance Statistics → Dlci CIR&EIR 13. Dlci Performance Statistics 2 What It Indicates 14. Frame Relay Performance Statistics 1 What It Indicates Frame Relay ErrorsFrame Relay Performance Statistics Main Menu → Status → Performance Statistics → Frame Relay Frame Relay LMI Frame Relay Errors contdFrame Relay Hdlc Errors 14. Frame Relay Performance Statistics 2 What It Indicates TC Sublayer ATM Performance StatisticsMain Menu → Status → Performance Statistics → ATM 15. ATM Performance Statistics 1 What It Indicates 15. ATM Performance Statistics 2 What It Indicates Statistic What It Indicates Ethernet Performance StatisticsMain Menu → Status → Performance Statistics → Ethernet Trap Event Log Screen Example Trap Event LogMain Menu → Status → Trap Event Log Operation and Maintenance FTP Operation FTP File Transfers Dir directory Command Definition If the message displayed is Then Upgrading System Software Changing Software Determining Whether a Download Is Completed If retrieving Then Transferring Collected Data Troubleshooting Indicators See Problem Indicators Resetting the Unit By Cycling the Power Resetting the Unit and Restoring CommunicationResetting the Unit from the Control Menu If selecting Following occurs Restoring Communication with an Improperly Configured Unit Main Menu → Control → LMI Packet Capture Utility Troubleshooting Management Link FeatureLMI Packet Capture Utility Feature LMI Trace Log Example LMI Packet Capture Utility → Display LMI Trace Log Alarm Conditions 1 What It Indicates What To Do Alarms Alarm Conditions 2 What It Indicates What To Do Alarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Device Problems 1 Symptom Possible Cause Solutions Troubleshooting TablesDevice Problems See Trap Event Log in , Operation and Maintenance Unit Device Problems 2 Symptom Possible Cause Solutions ATM Problems Symptom Possible Cause Solutions ATM Problems Frame Relay PVC Problems Symptom Possible Cause Solutions Frame Relay PVC Problems Test Menu Example Tests Available Starting and Stopping a Test Test Timeout FeatureWhen the status of a test is Only command available is Active Aborting All Tests PVC Tests Screen Example PVC Tests Main Menu → Test → Data Port PVC Tests PVC LoopbackSend Pattern Main Menu → Test → Network PVC Tests Connectivity Monitor Pattern Main Menu → Test → Data Port Physical Tests DTE Loopback Main Menu → Test → IP Ping IP Ping Test Procedure Main Menu → Test → Lamp Test Lamp Test OpenLane Support of FrameSaver Devices Setting Up OpenLane for FrameSaver DevicesOpenLane Support of FrameSaver Devices Setting Up the OpenLane SLM System Setting Up FrameSaver and SLV Support Setting Up OpenLane for FrameSaver Devices 10-1 Setting Up Network Health for FrameSaver Devices Installation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports About At-a-Glance Reports About Service Level ReportsGenerating Reports for a Group Printed Reports Reports Applicable to FrameSaver SLV DevicesAbout Trend Reports 10-8 10-9 10-10 Menus Menu Hierarchy Status Menu Hierarchy Frame Relay Mode Control Easy Install Menu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults Downloading MIBs and Snmp Traps MIB Support FrameSaver Units sysObjectID system System Group mib-2FrameSaver Units sysDescr system Frame Relay Logical Layer Interfaces Group mib-2Paradyne Indexes to the Interface Table ifTable Physical Layer Rmon Logical Layer NetScout Indexes to the Interface Table ifTable Examples Standards Compliance for Snmp Traps Variable-Binding Trap authenticationFailureTrap warmStart Table B-3. warmStart Trap What It Indicates Possible Cause Traps linkUp and linkDown Sample strings Physical Sublayer Interface Variable-Bindings Possible Cause Table B-6. linkUp and linkDown Variable-Bindings 2 ATM Logical Link Sublayer DevHealthAndStatus Traps enterprise-Specific SLVs devFrExt.mib Placeholder Traps RMON-Specific Rising Event Operation Rmon Alarm and Event DefaultsEvent Defaults EventIndex EventDescription EventType Physical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults MIB FR DTE MIB Dlci Alarm Defaults ± Paradyne Area Frames Sent Snmp MIBs and Traps, and Rmon Alarm Defaults Object ID Cross-References Numeric Order 6.1.4.1.1795.2.24.2 6.1.2.1.2.2.16.1.2.1.2.10.32.2.1 Dlci CIR 6.1.4.1.1795.2.24.2.6.9.4 6.1.4.1.1795.2.24.2.6.9.4.4.2 Dlci EIR 6.1.4.1.1795.2.24.2.6.9.4.7.1 6.1.4.1.1795.2.24.2.6.9.4.5.2.1 6.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Rear Panel Connectors, Cables, Pin Assignments DSL Network Interface Cable Figure C-1. DSL Network Interface Cable with RJ48C Connector Signal Direction Pin # COM Port Connector Pin Standard EIA-232-D Crossover Cable AT Command String To configure the modem to Direction Pin Socket Data Port ConnectorStandard V.35 Straight-through Cable Ethernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications Data Port COM PortDSL Network Interface Ethernet Port Equipment Model / Feature NumberFrameSaver SLV Upgrade Equipment List Cables Description Model / Feature NumberDescription Part Number Feature Number Optional Features Numbers Index IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9