Paradyne FrameSaver DSL, 9783 manual Set the configuration option

Security and Logins

"Procedure

To limit asynchronous terminal access to the menu-driven user interface:

1. Select the Communication Port options.

Main Menu → Configuration → Management and Communication → Communication Port

2. Set the following configuration options, as appropriate.

To . . .	Set the configuration option . . .
Require a login	Login Required to Enable.
	NOTE: User ID and password combinations
	must be defined. See Creating a Login.

Limit the effective access level to Level-3 or Level-2

Port Access Level to Level-2 or Level-3.

NOTE: Regardless of a user's login access level, a user cannot operate at a level higher than the access level specified for the port (e.g., if a user has a Level-1 login and Level-2 port access has been set, the Level-1 user can only operate as a Level-2 user).

If you are going to allow Level-1 users to configure the unit, keep the access at Level-1.

NOTE:

See Resetting the Unit and Restoring Communication in Chapter 8, Troubleshooting, should you be locked out inadvertently.

3. Save your changes.

9783-A2-GB20-00 July 2000 5-3