Paradyne FrameSaver DSL, 9783 manual If your login was Then

User Interface and Basic Operation

If your login was . . .	Then the . . .
Valid	Main Menu appears. Begin your session.
	NOTE: If your login is valid, but access is denied, there
	are two currently active sessions.

Invalid

Message, Invalid Password, appears on line 24, and the Login screen is redisplayed.

After three unsuccessful attempts:

HA Telnet session is closed.

HThe User Interface Idle screen appears for a directly connected terminal or modem.

HAn SNMP trap is generated.

HAccess is denied.

See your system administrator to verify your login (Login ID/Password combination).

FrameSaver units support two sessions simultaneously. If two sessions are currently active, wait and try again.

HIf two sessions are currently active and you are attempting to access the unit through Telnet, the local Telnet client process returns a Connection refused: message at the bottom of the screen.

HIf two sessions are currently active and you are attempting to access the unit over the COM port (using a terminal or external modem, not via Telnet), the User Interface Already In Use screen is redisplayed. In addition, the type of connection (Telnet Connection or Direct COM Port Connection) for each current user is identified, along with the user's login ID.

"Procedure

To end the session:

1.Press Ctrl-a to switch to the function keys area of the screen.

2.Type e ( Exit) and press Enter.

ÐFor a terminal-connected to the COM port, the session is ended.

ÐFor a modem connected to the COM port, the session is ended and the modem is disconnected.

ÐFor a Telnet connection, the session is closed and, if no other Telnet or FTP session is occurring over the connection, the modem is disconnected.

If ending a session from the Configuration branch, see Saving Configuration Options in Chapter 3, Configuration Procedures.

9783-A2-GB20-00 July 2000 2-3