Paradyne 9783, FrameSaver DSL manual 6-8

Operation and Maintenance
6-8 9783-A2-GB20-00
July 2000
Table 6-5. Device Messages (2 of 5)
Message What To DoWhat It Indicates
Duplicate DLCI
Number DLCI number entered is not unique for the frame relay
link.
No action is needed; previous
contents of the DLCI number
field is restored.
File Transfer Complete
(Seen at an FTP
terminal.)
A file transfer was
performed successfully. Switch to the newly downloaded software.
See
Changing Software in
Chapter 7,
FTP Operation .
File Transfer Failed –
Invalid file
(Seen at an FTP
terminal.)
A file transfer was
attempted, but it was not
successful.
HTry again, making sure you
type the filename correctly.
HExit the FTP session, or
download another file.
See
Changing Software in
Chapter 7,
FTP Operation .
Invalid Character ( x )A non-valid printable ASCII
character has been
entered.
Reenter information using valid
characters.
Invalid date: must be
mm/dd/yyyy A non-valid date was entered on the System
Information screen.
Reenter the date in the
month/day/4-digit year format.
Invalid date and/or
time A non-valid date or time was entered on the System
Information screen. The
date does not exist (e.g.,
February 30th).
Reenter the date in the
month/day/4-digit year format
and/or time in the
hour:minutes:seconds format.
Invalid time: must be
hh:mm:ss A non-valid system time was entered on the System
Information screen.
Reenter the time in the
hour:minutes:seconds format.
Invalid – Already
Active A test was already in progress when it was
selected.
No action is needed.
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
HTry again.
HContact your system
administrator to verify your
password.
Invalid Test
Combination A conflicting loopback or pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
HWait until other test ends and
message clears.
HCancel all tests from the Test
screen (Path: main/test ).
HStop the test from the same
screen the test was started
from.