Paradyne FrameSaver DSL, 9783 manual Trap warmStart, Trap authenticationFailure, Variable-Binding

SNMP MIBs and Traps, and RMON Alarm Defaults

Trap: warmStart

This trap indicates that the FrameSaver unit has been reset and has stabilized.

Table B-3. warmStart Trap

Trap	What It Indicates	Possible Cause
warmStart	FrameSaver unit has just	H Reset command sent.
	reinitialized and stabilized	H Power disruption.
	itself.
		String:
	Variable-Binding
		`Unit reset.'
	devLastTrapString
	(devHealthAndStatus. mib)

Trap: authenticationFailure

This trap indicates that access to the FrameSaver unit was unsuccessful due to lack of authentication.

Table B-4. authenticationFailure Trap

Trap	What It Indicates	Possible Cause
authenticationFailure	Access to the FrameSaver	H SNMP protocol message not
	unit was attempted and	properly authenticated.
	failed.	H Three unsuccessful attempts
		were made to enter a correct
		login user ID/password
		combination.
		H IP Address security is enabled
		and a message was received
		from the SNMP Manager
		whose address was not on the
		lost of approved managers.
		String:
		`Unauthorized access attempted.'
	Variable-Binding
	devLastTrapString
	(devHealthAndStatus. mib)

9783-A2-GB20-00 July 2000 B-7