Paradyne FrameSaver DSL, 9783 manual Node IP Options 3, TS Access Management Link

Configuration Options

Table 4-11. Node IP Options (3 of 3)

TS Access Management Link

Available Settings: None, PVCname

Default Setting: None

Specifies a troubleshooting management link for the special needs of network service providers.

If the setting is changed from the management PVC name to None, the Delete the

Management PVC PVCname and the associated DLCICircuit Record? prompt appears. If you select:

HNo ± The link designation is removed and the option is set to None.

HYes ± The link designation is removed and the option is set to None, and the link and its DLCI and/or VPI,VCI will be deleted.

None ± Disables or does not specify a TS Access Management Link.

PVCname ± Specifies the name of the TS Management PVC.

Display Conditions ± This selection only appears when a dedicated management PVC has been defined on the network frame relay or ATM link.

TS Management Link Access Level

Available Settings: Level-1, Level-2,Level-3

Default Setting: Level-1

Specifies the highest access level allowed when accessing the unit via a Telnet or FTP session when the service provider is using the TS Access Management Link.

Display Conditions ± This option only appears when TS Access Management Link is set to None.

NOTES: ± Telnet and FTP sessions on this link are not affected by the access level set by the Session Access Level, Login Required, or FTP Login Required option settings (see Table 4-14,Telnet and FTP Session Options).

±Telnet and FTP sessions on this link are affected by the Telnet Session, Inactivity Timeout, Disconnect Time and FTP Session option settings.

Level-1± Allows Telnet or FTP access by network service providers with the capability to view unit information, change configuration options, and run tests. This is the highest access level allowed. Use this setting when downloading files.

Level-2± Allows Telnet or FTP access by network service providers with the capability to view unit information and run tests only; they cannot change configuration options.

Level-3± Allows Telnet access by network service providers with the capability to view unit information only; they cannot change configuration options or run tests.

9783-A2-GB20-00 July 2000 4-27