Paradyne FrameSaver DSL, 9783 manual PVC Connection Options 2, Destination Link, Destination Dlci

Configuration Options

Table 4-10. PVC Connection Options (2 of 2)

Destination Link

Possible Settings: Net1-FR1

Default Setting: Initially blank; no default.

Specifies the frame relay interface used as the destination link; the to end of a from-to link. The only valid settings for this configuration option are frame relay interfaces that have at least one DLCI or EDLCI defined which are not part of a PVC connection or management link. For example, if the network interface has no DLCIs defined, Net1-FR1 would not appear as a valid setting.

Net1-FR1± Specifies the Network interface as the destination link.

Destination DLCI

Possible Settings: 16 ± 1007

Default Setting: Initially blank; no default.

Specifies the destination DLCI for a frame relay interface. The DLCI must be defined and cannot be part of a PVC connection or management link. For multiplexed DLCIs, at least one EDLCI must be unconnected for the DLCI to be a valid selection.

NOTES: ± Primary Destination DLCI has no value if Primary Destination Link contains no value.

±For the basic feature set, only one EDLCI per multiplexed DLCI may be used in the PVC connection.

16 ± 1007 ± Specifies the DLCI number.

Destination EDLCI

Possible Settings: 0 ± 62

Default Setting: Initially blank; no default.

Specifies the destination Embedded Data Link Connection Identifier (EDLCI) for a frame relay interface when a multiplexed DLCI record is selected as one end of a connection.

Display Conditions ± This option only appears when the Primary Destination DLCI contains a multiplexed DLCI record number.

0 ± 62 ± Specifies the EDLCI number.

9783-A2-GB20-00 July 2000 4-23