Paradyne 9783 instruction

FrameSaver® DSL 9783 Router

Installation Instructions

Document Number 9783-A2-GN11-10

April 2001

Contents
FrameSaver DSL 9783 Router Overview	1
Upgrading a Basic Unit to SLV	3
Product Documentation Online	3
Package Checklist	3
Wiring and Cables You May Need	4
Prior to Installing the Router	5
Installing the Router	6
Status LEDs	10
Troubleshooting	11
Configuration Setup	12
Verifying that Self-TestPassed	15
Using the Easy Install Feature	15
Completing Setup From the NOC	16
Setting Up for In-BandManagement	17
Provisioning the Router Interface	20
Cables and Connectors	21
DSL Router Technical Specifications	24
Important Safety Instructions	25
Government Requirements	27
Warranty, Sales, Service, and Training Information	28

FrameSaver DSL 9783 Router Overview

The FrameSaver® DSL (Digital Subscriber Line) 9783 Router is a component in the FrameSaver system. This system allows you to perform end-to-end service level management (SLM) across a hybrid FrameSaver DSL/ATM/Frame Relay network. Service providers can isolate and correct problems remotely from their NOC (Network Operations Center).

1

Image 1

Paradyne installation instructions FrameSaver DSL 9783 Router

Contents

FrameSaver DSL 9783 Router Customer Premises HQ Site Central Office Customer Premises Remote SiteFrame Relay NSPs Network Upgrading a Basic Unit to SLV Package ChecklistProduct Documentation Online FrameSaver DSL 9783 User’s Guide Interface Feature Connection Cables Number Wiring and Cables You May NeedEthernet port Cable supplied for use in the U.S Provisioning Data Circuits in OpenLane Prior to Installing the Router Procedure Installing the RouterDSL 9783 Router Ethernet COM System OK green Alarm red Power-OnEthernet Port green Condition Status Status LEDs LED Symptom Action TroubleshootingUnplug the unit, unless instructed to do so by the service Provider Configuration Setup Main Menu Menu Navigation Main Menu → ConfigurationPress Main Menu → Easy Install Using the Easy Install FeatureEasy Install Screen Example Verifying that Self-Test Passed Completing Setup From the NOC Configuring Snmp Trap Managers and Traps Procedure Setting Up for In-Band Management Show config Configuration → Virtual Router Ports → Dlci Records Verifying the End-to-End Management Path Checking That Data is Being Received ProcedureMain Menu → Status → Performance Statistics → Frame Relay Checking PVC Connections Provisioning the Router Interface Pin Connector Similar to RJ48C Pin # Function Cables and ConnectorsCable Ethernet Pin Straight-Through ConnectionsPin Ethernet Crossover Cable Function Pin # Pin # Function Pin # Signal Direction Connecting an External Modem Specification DSL Router Technical Specifications Important Safety Instructions EMI Notices CE Marking Government Requirements Document Feedback Warranty, Sales, Service, and Training InformationTrademarks