Verifying that Self-Test Passed

To verify that the unit passed its self-test, go to the System and Test Status screen.

Main Menu Status System and Test Status

The results of the self-test appear directly under the screen title.

If any failure messages appear, reset the unit by disconnecting, then reconnecting the power cord. The unit will perform the self-test again. If the failure reappears, call your service representative for assistance.

Using the Easy Install Feature

An Easy Install screen is provided for custom configurations, but you are not required to use it for normal installation. You can configure the router by making selections from the Configuration Edit/Display menu.

Procedure

1.Select the Easy Install feature.

Main Menu Easy Install

Easy Install Screen Example

main/easy_install

 

 

 

 

 

9783-RtrSLV

Device Name: Node

A

 

2/26/2001 00:01

 

 

 

EASY INSTALL

 

DSLAM Type:

 

Paradyne

 

 

Node

IP Address:

000.000.000.000

Clear

Node

Subnet Mask:

000.000.000.000

Clear

TS

Access: VPI,VCI

0,35

 

 

Create a Dedicated

Network Management Link

Ethernet Management Options Screen

 

Network

1

DSL Line

Rate (Kbps)

AutoRate

Network

1

FRF.8 Encapsulation Mod

Transparent

-----------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu

MainMenu Exit

Save

 

15

Page 15
Image 15
Paradyne 9783 Verifying that Self-Test Passed, Using the Easy Install Feature, Main Menu → Status → System and Test Status