Paradyne installation instructions Installing the Router, Procedure, DSL 9783 Router

Installing the Router

Place the FrameSaver DSL 9783 Router on a flat surface, with clearance for the rear connectors.

Procedure

1.Use the supplied 8-pin DSL network cable (for use in the U.S.), or a 6-pin DSL network cable (using connectors similar to RJ11), as applicable, for the DSL connection. Insert one end of the cable into the jack labeled NET on the router. Insert the other end into the wall jack for DSL data communications.

DSL 9783 Router

NET

POWER

COM

ETHERNET

NET

DSL

Network

For domestic models, go to Step 3 on page 7.

2.For certain international models, a ferrite choke has been provided. Place the ferrite choke on the network cable, as close as possible to the rear panel.

Close the two halves around the cable and snap the latch shut.

Ferrite

Choke

00-16878

NET

NET

DSL

Network

01-16944

6