Pin Straight-Through Connections, Ethernet | Paradyne 9783 specification

TThe Ethernet interface connector uses an 8-pin, non-keyed modular plug. Use shielded twisted-pair CAT5, or better, cables. See Step 3 on page 7.

— To connect the router to an Ethernet hub, use a straight-through connection.

8-Pin Straight-Through Connections		Ethernet
Pin #	Function	Cable
Pin #	Function
1	10/100BaseT TX D+
2	10/100BaseT TX D–	8-Pin
		8-Pin
3	10/100BaseT RX D+	Plug
3	10/100BaseT RX D+
4 & 5	Not used
6	10/100BaseT RX D–
7 & 8	Not used	Pin #8

Pin #1

98-16055a

– or –

—To connect the router to a PC with an Ethernet NIC card, use an Ethernet crossover cable.

8-Pin Ethernet Crossover Cable

Function Pin #

Pin # Function

10/100BaseT TX D+	1
10/100BaseT TX D–	2
10/100BaseT RX D+	3
Not Used	4
Not Used	5
10/100BaseT RX D–	6
Not Used	7
Not Used	8

110/100BaseT TX D+

210/100BaseT TX D–

310/100BaseT RX D+

4Not Used

5Not Used

610/100BaseT RX D–

7Not Used

8Not Used

Pin #1/2 = Orange/White	Pin #3/6 = Blue/White	99-16518
Pin #1/2 = Orange/White	Pin #3/6 = Blue/White
Twisted Pair	Twisted Pair

22

Image 22

Paradyne 9783 Pin Straight-Through Connections, Pin Ethernet Crossover Cable Function Pin # Pin # Function

Contents

FrameSaver DSL 9783 Router Customer Premises HQ Site Central Office Customer Premises Remote SiteFrame Relay NSPs Network Product Documentation Online Package ChecklistUpgrading a Basic Unit to SLV FrameSaver DSL 9783 User’s Guide Ethernet port Wiring and Cables You May NeedInterface Feature Connection Cables Number Cable supplied for use in the U.S Prior to Installing the Router Provisioning Data Circuits in OpenLane Procedure Installing the RouterDSL 9783 Router Ethernet COM System OK green Alarm red Power-OnEthernet Port green Status LEDs Condition Status Unplug the unit, unless instructed to do so by the service TroubleshootingLED Symptom Action Provider Configuration Setup Main Menu Menu Navigation Main Menu → ConfigurationPress Easy Install Screen Example Using the Easy Install FeatureMain Menu → Easy Install Verifying that Self-Test Passed Completing Setup From the NOC Setting Up for In-Band Management Configuring Snmp Trap Managers and Traps Procedure Configuration → Virtual Router Ports → Dlci Records Show config Verifying the End-to-End Management Path Checking That Data is Being Received ProcedureMain Menu → Status → Performance Statistics → Frame Relay Provisioning the Router Interface Checking PVC Connections Pin Connector Similar to RJ48C Pin # Function Cables and ConnectorsCable Ethernet Pin Straight-Through ConnectionsPin Ethernet Crossover Cable Function Pin # Pin # Function Connecting an External Modem Pin # Signal Direction DSL Router Technical Specifications Specification Important Safety Instructions CE Marking EMI Notices Government Requirements Document Feedback Warranty, Sales, Service, and Training InformationTrademarks