3.Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET.

Use a straight-through cable to connect the other end of the cable to an Ethernet hub. Do not connect to the hub’s optional Uplink connection with a straight-through cable; the Uplink connection requires an Ethernet crossover cable.

DSL 9783 Router

ETHERNET

POWER

COM

ETHERNET

NET

Ethernet

Straight-Through

Cable

Hub

00-16879

– or –

Use an Ethernet crossover cable to connect to a PC with an Ethernet Network

Interface Card (NIC) installed or a hub’s Uplink connection.

7

Page 7
Image 7
Paradyne 9783 installation instructions Ethernet