Configuration Setup

Once the router is installed, it can be accessed locally through the menu-driven user interface via an asynchronous terminal or PC connection, or remotely via a Telnet session, and the router’s interfaces can be provisioned. The following provisioning can Tbe set up:

Frame relay, ATM, and physical layer provisioning – Typically set up by the CLEC (Competitive Local Exchange Carrier) using the menu-driven user interface via an ASCII terminal or PC running a terminal emulation program, or a Telnet session.

Router provisioning, using the CLI – Typically accessed by the frame relay

Tservice provider providing managed router service, or by the end user.

SLM provisioning – Typically set up by the frame relay service provider or the CLEC.

As soon as the router’s COM port is connected to a terminal or PC, the menu-driven user interface can be accessed. The terminal or PC’s configuration must be compatible with the router’s COM port settings.

12

Page 12
Image 12
Paradyne 9783 installation instructions Configuration Setup