Paradyne 9783 Prior to Installing the Router, Provisioning Data Circuits in OpenLane

Prior to Installing the Router

These Installation Instructions assume that the virtual circuits at the DSLAM have already been configured. Provisioning of these circuits can be simplified by using the OpenLane SLM (Service Level Management) system, as indicated in Provisioning Data Circuits in OpenLane.

Provisioning Data Circuits in OpenLane

Use the OpenLane SLM system’s Provision Circuit screen to add new circuits that start at the FrameSaver DSL endpoint and traverse the SCM and ATM line card in the Hotwire GranDSLAM, and the default VC sets (from 1 to 4). A group of 250 VCs can be allocated to each line card, which can be assigned to any port on the card. These custom connections carry the frame relay traffic.

Note that before the custom cross-connects are configured, the Maximum VCI number for the uplink VP to be used by these custom connections must be

Tspecified on the Max VCI per VPI screen, and the apply changes executed.

For ATM line cards, custom connections can be used to expand the number of VCs connected to the card. Each of the 250 VCs can be cross-connected from any VC on the uplink to any port on the line card.

he following information is collected by the Provision Circuit process:

Uplink VPI/VCI

Slot number and Port number of the DSL connection

Traffic Profile

DSL link VPI/VCI

TFrame relay DLCI (provided by NSP) Frame relay CIR, Be, Bc (provided by NSP)

A Circuit ID is then applied to the newly defined circuit, and stored in both the router and the OpenLane SLM system.

5