Paradyne 9783 Wiring and Cables You May Need, Interface Feature Connection Cables Number

Wiring and Cables You May Need

The following wiring and cables are used with this product, which uses standard interface connectors:

❑Standard connectors: An 8-pin modular (similar to RJ48C) or 6-pin modular (similar to RJ11) wall jack for the DSL network connection.

❑DSL wiring: Unshielded twisted-pair wiring (CAT3, or better). The CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).

❑Ethernet wiring: Shielded twisted-pair wiring (CAT5, or better). The CAT5 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).

For standard cables, refer to Cables and Connectors on page 21 for pin numbers. For Paradyne cables, contact your sales representative to order them.

Interface		Feature
Connection	Cables	Number
COM port to a PC	DB25-to-DB25:
or asynchronous	Standard EIA-232 straight-through cable	—
terminal
	DB25-to-DB9:
	TDB25-to-8-pin modular adapter	3100-F1-920
	8-pin modular-to-DB9 cable	3100-F2-550
	(14 feet – 4.3 m)
ETHERNET port	For connection to a PC NIC:
to a NIC on a PC	Standard Ethernet crossover cable	—
or an Ethernet hub
	For connection to an Ethernet Hub:
	Standard Ethernet straight-through cable	—
NETwork to the	Standard straight-through DSL network cable	3100-F1-500
DSL wall jack	with 8-pin modular connectors – similar to an
	RJ48C-toRJ48C cable (20 feet – 6.1 m).
	Cable supplied for use in the U.S.
	Standard DSL network cable with	—
	6-pin connectors – similar to an RJ11 cable

4