Paradyne FrameSaver DSL, 9783 manual IP Routing Table Values Column What It Indicates

Operation and Maintenance

Table 6-11. IP Routing Table Values

Column	What It Indicates
Destination	The Destination IP Address for the route:
	001.000.000.000 ± 223.255.255.255
Mask	The Destination Subnet Mask for the route:
	H 000.000.000.000 ± 225.255.255.255 for network routes
	H FFF.FFF.FFF.FFF for host routes
	H 127 may appear as well. It is a reserved number.
Gateway	The Gateway IP Address for the route:
	001.000.000.000 ± 223.255.255.255
Hop	The number of hops in the route to the destination (1±15).
	If 16 appears, the route is in the process of being aged out.
Type	The method used to add the route to the table.
	H RIP: The route was discovered through Routing Information
	Protocol.
	The route remains until its TTL (Time to Live) expires, a
	better route is provided via RIP, or there is a power reset.
	H Loc: The route was added due to the FrameSaver unit's
	local configuration; a Default IP Address or an SNMP
	Manager Initial Route Destination have been configured.
	The route remains until the unit's configuration changes.
	H NMS: The route was added by a Network Management
	System using SNMP (Simple Network Management
	Protocol).
	The route remains until there is a power reset of the unit.
	H Tmp: The route was added as a temporary route in order to
	respond to an IP packet that was received.
	The route remains until its TTL expires or there is a power
	reset.
Interface	Specifies the interface to be used to reach the destination.
	H COM: Communications port
	H Ethernet: Ethernet port
	H PVCname: Name of the management PVC
	(e.g., PVCMgmt1001)
	H Internal: The interface to be used for software loopbacks or
	internal device functions in order to reach the destination.
TTL	The Time to Live that was set for the route, in seconds: 1 ± 999

9783-A2-GB20-00 July 2000 6-23