Paradyne FrameSaver DSL, 9783 manual Limiting Telnet or FTP Access Over the TS Management Link

Security and Logins

Limiting Telnet or FTP Access Over the TS Management Link

"Procedure

To limit Telnet or FTP access when the session is on the TS Management Link:

1. Select the Telnet and FTP Session options.

Main Menu → Configuration → Management and Communication →

Telnet and FTP Sessions

2.Disable Telnet Session and/or FTP Session, as appropriate.

3.Return to the Management and Communication menu, and select Node IP.

4.Set the following configuration options, as appropriate.

To . . .

Set the configuration option . . .

Disable access via a	TS Management Link to None.
TS Management Link
Assign an access level to the	TS Management Access Level to Level-2
TS Management Link	or Level-3.
	NOTE: Regardless of a user's login access
	level, a user cannot operate at a level higher
	than the access level specified for the session
	(e.g., if a user has a Level-1 login and Level-2
	telnet access has been set, the Level-1 user
	can only operate as a Level-2 user).
	If you are going to allow users to configure the
	unit, keep the access at Level-1.

5. Save your changes.

See Configuring Telnet and/or FTP Session Support or Configuring Node IP Information in Chapter 4, Configuration Options, for more information about these configuration options.

9783-A2-GB20-00 July 2000 5-7