Section 4, User Interface Guide ATLAS 550 System Manual
242 © 2002 ADTRAN, Inc. 61200305L1-1F
DEDICATED MAPS (QUAD/OCTAL FXO MODULE)DEDICATED MAPS (FXO) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press <Enter> to activate the submenus.
DEDICATED MAPS (FXO) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the TO/FROM connection. The following selections may apply to the
Quad/Octal FXO Option Module, depending on the application:
DNIS WINK TIMEOUT
Write security: 3; Read security: 5
When DNIS DELAY is ENABLED, a wink will be returned to the originating switch after 5 seconds
if the FXS does not detect an off hook. This option, when DISABLED, allows the FXS port to ring
without winking until the call is answered.
Trunks can be taken out of service by telco if there is No wink. Use caution when disabling
this option.
# PORTS
Write security: 3; Read security: 5
Defines ports to be used for this connection.
PORTS AVAILABLE
Write security: 3; Read security: 5
Indicates which ports of the module are assigned. Port assignment is based on the following items:
DIGIT 0-9 This DS0 is available. The digit that displays in this field represents the
last digit of the DS0 number.
*This DS0 has been requested for this connection, but the DS0 is not yet
activated for this port.
!This DS0 is used by this port in this connection and is currently
activated.
SThis DS0 is used in the switched DIAL PLAN.
SThis DS0 is used in the switched DIAL PLAN and conflicts with this
connection.
NThis DS0 is already used in this DEDICATED MAP.
NThis DS0 is already used in this DEDICATED MAP and conflicts with this
connection.