ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 95
To support these TFTP transfers, ADTRAN delivers a TFTP Server (as part of ADTRAN Utilities) on the
ATLAS 550 documentation CD. You can install the ADTRAN Utilities software on any PC running
Microsoft Windows, and use the TFTP server for TFTP transfers to/from the ATLAS 550.
Only one configuration transfer session (upload or download) can be active at a time. The TCP/IP
parameters are not saved or overwritten as part of an ATLAS 550 unit’s transferred configuration;
therefore, identical configurations can be sent to multiple units. For complete details on configuration
transfers to/from the ATLAS 550, please refer to DLP-008, DLP-009, DLP-010, and DLP-011.
SYSTEM UTILITY > CONFIG TRANSFER > TRANSFER METHOD
Write security: 3; Read security: 5
Displays the method used to transfer the configuration file to or from a server. Select TFTP to transfer files
using the 10/100BaseT ETHERNET port, or select XMODEM to use the CRAFT or CONTROL IN (Chain)
interfaces and a program such as Windows HyperTerminal.
SYSTEM UTILITY > CONFIG TRANSFER > TFTP SERVER IP ADDRESS
Write security: 3; Read security: 5
Specifies the IP address of the TFTP server. Get this address information from your System Administrator.
SYSTEM UTILITY > CONFIG TRANSFER > TFTP SERVER FILENAME
Write security: 3; Read security: 5
Defines the name of the configuration file that you transfer to or retrieve from the TFTP server. The default
name is at550.cfg, but it is editable.
SYSTEM UTILITY > CONFIG TRANSFER > CURRENT TRANSFER STATUS
Read security: 5
Indicates the current status of the transfer.
SYSTEM UTILITY > CONFIG TRANSFER > PREVIOUS TRANSFER STATUS
Read security: 5
Indicates the status of the previous transfer.
SYSTEM UTILITY > CONFIG TRANSFER > LOAD AND USE CONFIG
Write security: 3; Read security: 5
Retrieves the configuration file specified in the TFTP SERVER FILENAME field from the server. To start this
command, enter Y. To cancel this command, enter N.
If you execute this command, the ATLAS 550 retrieves the configuration file, reboots, then
restarts using the new configuration.