Section 4, User Interface Guide ATLAS 550 System Manual
292 © 2002 ADTRAN, Inc. 61200305L1-1F
DIAL PLAN (FXS) > USER TERM > IFCE CONFIG > ANI TO CALLER ID
Write security: 3; Read security: 5
Use this option to generate (FSK) Caller ID out the FXS user term port to the subscriber. The ATLAS 550
generates Caller ID from the calling party number (typically when the call is terminated from a PRI). The
calling party number may also come from a Trunk Number on a network term entry, or from the Caller ID
field on a user term entry (if the call comes from one of these sources).
Additional CPE equipment is needed to receiver Caller ID, such as a Caller ID box. To receive Calling
Name information, this equipment must support Multiple Data Message Format (MDMF).
DIAL PLAN (QUAD/OCTAL FXO MODULE)DIAL PLAN (FXO) > NETWORK TERM
Write security: 3; Read security: 5
This menu allows the user to define option parameters for ports which terminate an analog FXO
connection from the Network (PSTN).
DIAL PLAN (FXO) > NETWORK TERM > IFCE CONFIG
Write security: 3; Read security: 5
Specifies the configuration parameters for the endpoint.
DIAL PLAN (FXO) > NETWORK TERM > IFCE CONFIG > PORTS AVAILABLE
Write security: 3; Read security: 5
Indicates which ports of the Quad/Octal FXO Option Modules have been defined in this switched endpoint
(indicated by “! “), in another switched endpoint (indicated by “s”), or in a DEDICATED MAP (indicated by
“n”). This field is read-only. The following characters may display in this field:
Calling Name will only be delivered (with the number) if a call is received from a PRI that
has been provisioned to provide Calling Name information. Otherwise, only the Calling
Party Number will be generated.
0-9 This port is available.
*This port is requesting this port for this connection, but the port is not
yet activated.
!This port is used by this endpoint.
SThis port is used elsewhere in the switched DIAL PLAN.
SThis port is in the switched dial plan and conflicts with this endpoint.
NThis port is used in one or more DEDICATED MAPS.
NThis port is in one or more DEDICATED MAPS, and conflicts with this
endpoint.
•This port is the wrong kind of port for this endpoint.