Section 4, User Interface Guide ATLAS 550 System Manual
256 © 2002 ADTRAN, Inc. 61200305L1-1F
DIAL PLAN > NETWORK TERM > OUT#ACCEPT > TREAT CALL AS
Write security: 3; Read security: 5
Allows the incoming call to be treated as the selected call type, regardless of the actual incoming call type.
The default selection, AS RECEIVED, effectively disables the feature by using the actual call type. Other
options include DATA 64K and DATA 56K.
DIAL PLAN > NETWORK TERM > OUT#REJ
Write security: 3; Read security: 5
Defines parameters for outgoing calls that ATLAS 550 will not send to the network.
DIAL PLAN > NETWORK TERM > OUT#REJ > REJECT NUMBER
Write security: 3; Read security: 5
Identifies which numbers this endpoint will not pass on toward the network. The reject list may consist of
multiple entries. The reject list may be used to more easily specify the call filtering desired. The wildcards
are identical as in OUT#ACCEPT (see Dial Plan > Network Term > Out#Accept on page 254).
DIAL PLAN > NETWORK TERM > OUT#REJ > DATA 64K, DATA 56K, AUDIO, SPEECH
Write security: 3; Read security: 5
Rejects outgoing calls based on call type. For example, setting the reject number to $, Digital 56/64 to
ENABLED, and Audio and Speech to DISABLED will reject all digital calls, but accept analog calls.
DIAL PLAN > NETWORK TERM > IFCE CONFIG
Write security: 3; Read security: 5
Specifies the configuration parameters for the endpoint. The selections displayed in this field are based on
the type of module selected in the SLOT/SVC option. For detailed information on submenus for a particular
module type, please refer to the dial plan interface configuration menu discussion for the appropriate
network, option, or resource module.
DIAL PLAN > NETWORK TERM > SUBST TEMPL
Write security: 3; Read security: 5
The substitution template allows the ATLAS 550 to select calls (based on telephone number) and substitute
The reject list takes precedence over the accept list. For example, 1-900-$ rejects all 1-900
long distance calls, and 1-$ rejects all long distance calls.
This list may remain blank if the accept list meets desired filtering.
Some of the options available in this submenu change depending on the type of modules
selected in the SLT/SVC or PRT/PEP fields. For more information on these submenus, refer
to the individual module interface configuration discussions in this section.