ADTRAN 1200305L1 system manual System Config

ATLAS 550 System Manual Section 4, User Interface Guide

SYSTEM CONFIG

The SYSTEM CONFIG menu allows you to set up the ATLAS 550 operational configuration. Figure 5 shows the items included in this menu.

Figure 5. System Config Menu

SYSTEM CONFIG > PRIMARY TIMING SOURCE

Write security: 1; Read security: 5

Selects the primary timing source. You can select either INTERNAL or any port available on the system that is capable of providing timing. Please refer to the specific module information to determine if a port can provide timing for the system.

SYSTEM CONFIG > BACKUP TIMING SOURCE

Write security: 1; Read security: 5

Selects the secondary timing source. You can select either INTERNAL or any port available on the system that is capable of providing timing. Please refer to the specific module information to determine if a port can provide timing for the system. The ATLAS 550 uses the backup timing source if the primary timing source goes into alarm. The BACKUP TIMING SOURCE should be different from the PRIMARY TIMING SOURCE for the most reliable operation.

SYSTEM CONFIG > ADLP ADDRESS

Write security: 2; Read security: 5

Shows the system ADTRAN Data Link Layer Protocol (ADLP) address for connecting remote devices to ADTRAN management software. The allowable range is between 2 and 65520. Enter a value not used by any other ADTRAN units controlled by the management software.

61200305L1-1F © 2002 ADTRAN, Inc. 79