ADTRAN 1200305L1 system manual Dedicated Maps CREATE/EDIT Maps Connects Port

ATLAS 550 System Manual Section 4, User Interface Guide

DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > PORT

Write security: 3; Read security: 5

Specifies the port to use for the FROM connection. When you select this option, a list of ports and module types appears. Select the appropriate port and module type, and press <Enter>.

DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > TO SLOT/SERVICE

Write security: 3; Read security: 5

Specifies the slot to use for the second end of a connection. Select this option, and a list of all of the slots and the modules installed in the slots displays. Pick the appropriate slot and press <Enter>. A PKTENDPT or PKTVOICE endpoint may also be selected as the service for the connection.

DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > PORT/PEP

Write security: 3; Read security: 5

Specifies the port to use for the second end of a connection. When you select this option, a list of ports and module types appears. Select the appropriate port and module type, and press <Enter>. If a PKTENDPT or PKTVOICE endpoint is selected for the TO SLOT/SERVICE field, the available packet endpoints or packet voice endpoints will display in the drop down menu after pressing <Enter>.

DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > FROM CONFIG

Write security: 3; Read security: 5

Specifies the configuration for the FROM connection. The selections displayed in this field are based on the type of module selected in the FROM SLT option. For detailed information on submenus for a particular module type, please refer to the DEDICATED MAPS menu discussion for the appropriate network, option, or resource module.

DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > TO CONFIG

Write security: 3; Read security: 5

Specifies the configuration for the TO connection. The selections displayed in this field are based on the type of module selected in the TO SLT option. For detailed information on submenus for a particular module type, please refer to the DEDICATED MAPS menu discussion for the appropriate network, option, or resource module.

DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > SIG

Write security: 3; Read security: 5

Specifies whether the ATLAS 550 uses active Robbed-Bit Signaling (RBS) on the connection. Selecting ON allows the ATLAS 550 to preserve signaling bits between the two endpoints of the connection. Selecting OFF ignores the signaling bits of the connection. This selection is automatically set to OFF when RBS does not apply. For example, a T1-to-Nx connection is set to OFF.

DEDICATED MAPS > CREATE/EDIT MAPS > ACTIVATE TIME

Write security: 3; Read security: 5

Sets the time when the map becomes active if you have selected AUTO in the ACTIVATE MAP field. Enter this time in hh:mm:ss 24-hour format.

61200305L1-1F © 2002 ADTRAN, Inc. 235