ADTRAN 1200305L1 system manual DLP-007

Section 5, DLP-007 ATLAS 550 System Manual

DLP-007

Perform Steps Below in the Order Listed

1.Connect to the ATLAS 550 using the RJ-45 CONTROL IN or CRAFT interface.

If you are not already connected to the shelf’s CONTROL IN or CRAFT interface (either with a VT100 compatible terminal or with a PC running VT100 emulation software), follow the procedure in DLP-001.Connecting to the CONTROL IN or CRAFT interface limits the upgrade procedure to XMODEM only.

2.Login to the unit.

Login to the unit using the read-write password (see DLP-002for details).

3.Go to the SYSTEM UTILITY menu and select the UPDATE FIRMWARE menu; press <Enter>.

4.Select the MODULE SLOT menu and press <Enter>.

Select the appropriate module slot to update. Select SLOT 0 to update the system controller.

Selecting ALL MODULES OF A TYPE and SYS CTRL will force a controller reboot during the update.

5.Go to the TRANSFER METHOD menu and select XMODEM.

6.From the RESTART SCHEDULE menu, select the time for the module to perform a restart after completing the update process.

RESTART IMMEDIATELY AFTER UPDATE restarts the system immediately after the update is complete. RESTART AT SPECIFIED DATE AND TIME allows you to select when the updated system will restart. If you select this option, a new field called RESTART DATE AND TIME displays below the current field. To use that option, enter the time in 24-hour format (such as 23:00:00 for 11:00 pm). Enter the date in mm-dd-yyyy format (for example, 09-30-2000).

7.View CURRENT UPDATE STATUS to verify the progress of the current firmware update or to identify any errors encountered during the download.

8.Select BEGIN FIRMWARE UPDATE to start the update. Enter Y to confirm the transfer and set up the module to receive the XMODEM Upload.

When the ATLAS 550 is ready to receive the XMODEM upload, the menu screen will clear and display Awaiting XMODEM Upload....<Ctrl-X> twice to Cancel. If this does not appear, please review the steps above for possible configuration errors.

9.From the terminal emulation software, begin the XMODEM upload by using the appropriate command sequence. This may take several minutes.

If necessary, refer to the terminal emulation software documentation for help. Also, when specifying the filename, ensure that the file transferred is the one provided by ADTRAN. Otherwise, the update will not complete successfully.

336 © 2002 ADTRAN, Inc. 61200305L1-1F