Mitsubishi Electronics FR-S500 instruction manual Appendix 1 Parameter Instruction Code List

Parameter Instruction Code List

APPENDIX 1 Parameter Instruction Code List

			Instruction		Computer	Link Parameter
			Code			Extension
Func-	Parameter				Link Data
		Name				Setting
tion	Number				Setting
			Read	Write		(Instruction
					Increments*
						Code 7F/FF)
	0	Torque boost	00	80	0.1%	0
	1	Maximum frequency	01	81	0.01Hz	0
	2	Minimum frequency	02	82	0.01Hz	0
	3	Base frequency	03	83	0.01Hz	0
	4	Multi-speed setting (high	04	84	0.01Hz	0
		speed)
functions
	5	Multi-speed setting	05	85	0.01Hz	0
		(middle speed)
	6	Multi-speed setting (low	06	86	0.01Hz	0
Basic		speed)
	7	Acceleration time	07	87	0.1s	0
	8	Deceleration time	08	88	0.1s	0
	9	Electronic thermal O/L	09	89	0.01A	0
		relay
	30	Extended function	1E	9E	1	0
		display selection
	79	Operation mode	4F	None	1	0
		selection

The extended function parameters are made valid by setting "1" in Pr. 30 "extended function display selection".

			Instruction		Computer	Link Parameter
Func-	Parameter	Name	Code		Link Data	Extension Setting
tion	Number		Read	Write	Setting	(Instruction
					Increments *	Code 7F/FF)
	10	DC injection brake	0A	8A	0.01Hz	0
		operation frequency
	11	DC injection brake	0B	8B	0.1s	0
		operation time
functions	12	DC injection brake	0C	8C	0.1%	0
		voltage
	13	Starting frequency	0D	8D	0.01Hz	0
	14	Load pattern selection	0E	8E	1	0
operation	15	Jog frequency	0F	8F	0.01Hz	0
	16	Jog acceleration/	10	90	0.1s	0
		deceleration time
	17	RUN key rotation	11	91	1	0
Standard		direction selection
	19	Base frequency voltage	13	93	0.1V	0
	20	Acceleration/deceleration	14	94	0.01Hz	0
		reference frequency
	21	Stall prevention function	15	95	1	0
		selection
	22	Stall prevention operation	16	96	0.1%	0
		level

180