Mitsubishi Electronics FR-S500 Parameter unit FR-PU04 setting, PU display language selection n13

Parameter unit (FR-PU04) setting

2.16 Parameter unit (FR-PU04) setting

When the optional parameter unit (FR-PU04) is connected to the RS-485 connector of the inverter, you can make the environment setting of the parameter unit.

CAUTION

When the parameter unit (FR-PU04) is used, operation from the operation panel is not accepted. (The stop key ( RESETSTOP ) is valid)

2.16.1 PU display language selection (n13 )

By setting the communication parameter n13 "PU display language selection", you can switch the display language of the parameter unit to another.

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
n13 (145)	PU display language	1	0 to 7 Setting is enabled when Pr. 30 = "1"
	selection

The parameter number in parentheses is the one for use with the parameter unit (FR- PU04).

<Setting>

n13 Setting	Display Language
0	Japanese
1	English (factory setting)
2	German
3	French
4	Spanish
5	Italian
6	Swedish
7	Finish

2.16.2 PU buzzer control (n14 )

By setting the communication parameter n14 "PU buzzer control", you can control "beep" produced when any of the parameter unit (FR-PU04) keys is operated.

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
				0: Without sound
n14 (990)	PU buzzer control	1	0, 1 1: With sound (factory setting)

Setting is enabled when Pr. 30 = "1"

The parameter number in parentheses is the one for use with the parameter unit (FR- PU04).

2

FUNCTIONS

151