Mitsubishi Electronics FR-S500 Function Parameter list, Indica Name Setting, Factory, Cus

Parameter List

Function (Parameter) list

2.1 Function (Parameter) list

CAUTION

indicates that the setting can be changed during operation if Pr. 77 "parameter

write disable selection" has been set to "0" (factory setting). (Note that the Pr. 53, Pr. 70 and Pr. 72 values can be changed only during PU operation.)

Parameter	Indica-	Name	Setting	Minimum	Factory	Refer	Cus-
				Setting			tomer
	tion		Range	Increments	Setting	To:	Setting
0		Torque boost	0 to 15%	0.1%	6%/5%/	63
					4%/
					(*1)
1		Maximum frequency	0 to 120Hz	0.1Hz	60Hz	64
2		Minimum frequency	0 to 120Hz	0.1Hz	0Hz	64
3		Base frequency	0 to 120Hz	0.1Hz	60Hz	65
4		Multi-speed setting	0 to 120Hz	0.1Hz	60Hz	66
		(high speed)
5		Multi-speed setting	0 to 120Hz	0.1Hz	30Hz	66
		(middle speed)
6		Multi-speed setting	0 to 120Hz	0.1Hz	10Hz	66
		(low speed)
7		Acceleration time	0 to 999s	0.1s	5s	67
8		Deceleration time	0 to 999s	0.1s	5s	67
9		Electronic thermal O/L	0 to 50A	0.1A	Rated	69
					output
		relay			current
30		Extended function	0, 1	1	0	80
		display selection
79		Operation mode	0 to 4, 7, 8	1	0	109
		selection

*1. The factory setting varies with the inverter capacity: 5% for FR-S540E-1.5K and 2.2K, 4% for FR-S540E-3.7K.

48