Mitsubishi Electronics FR-S500 Parameter List, Function Parameter list, Indica, Name, Factory

Parameter List

Function (Parameter) list
Func-	Para-	Indica-	Name	Setting Range	Minimum	Factory	Refer	Cus-
tion	meter	tion			Setting	Setting	To:	tomer
					Increments			Setting
			Multi-speed
	24		setting	0 to 120Hz, - - -	0.1Hz	- - -	66
			(speed 4)
			Multi-speed
	25		setting	0 to 120Hz, - - -	0.1Hz	- - -	66
			(speed 5)
			Multi-speed
	26		setting	0 to 120Hz, - - -	0.1Hz	- - -	66
			(speed 6)
			Multi-speed
	27		setting	0 to 120Hz, - - -	0.1Hz	- - -	66
			(speed 7)
			Stall
			prevention
	28		operation	0 to 120Hz	0.1Hz	60Hz	77
			reduction
			starting
			frequency
functions			pattern	0: Linear acceleration/
				deceleration A,
			Acceleration/	deceleration,
	29			1: S-pattern acceleration/	1	0	79
			deceleration
operation			Frequency	2: S-pattern acceleration/
				deceleration B
			Parameter 30 is basic function parameter.
Standard	31		jump 1A	0 to 120Hz, - - -	0.1Hz	- - -	80
			Frequency
	32		Frequency	0 to 120Hz, - - -	0.1Hz	- - -	80
			jump 1B
	33		jump 2A	0 to 120Hz, - - -	0.1Hz	- - -	80
	34		Frequency	0 to 120Hz, - - -	0.1Hz	- - -	80
			jump 2B
	35		Frequency	0 to 120Hz, - - -	0.1Hz	- - -	80
			jump 3A
	36		Frequency	0 to 120Hz, - - -	0.1Hz	- - -	80
			jump 3B
	37		Speed display	0, 0.1 to 999	0.1	0	81
	38		Frequency	1 to 120Hz	0.1Hz	60Hz	82
			setting voltage
			gain frequency
	39		Frequency	1 to 120Hz	0.1Hz	60Hz	82
			setting current
			gain frequency
			Start-time	0: Not detected
	40		ground fault		1	0	86
			detection	1: Detected
			selection

50