Mitsubishi Electronics FR-S500 Single-phase 100V power supply, Specification list

Specification list

(3) Single-phase 100V power supply

Type FR-S510WE- K-NA			0.1		0.2		0.4	0.75
Applied motor capacity (*1)		kW	0.1		0.2		0.4	0.75
		HP	1/8		1/4		1/2	1
Output	Rated capacity (kVA) (*2)		0.3		0.5		1.0	1.6
	Rated current (A)		0.8		1.4		2.5	4.1
	Overload current rating (*3)		150% 60s, 200% 0.5s (Inverse time characteristics)
	Voltage			Three phase, 200V to 230V (*4, 6)
supply	Rated input AC voltage/frequency		Single-phase, 100V to 115V 50Hz/60Hz
	Permissible AC voltage fluctuation				90 to 132V 50Hz/60Hz
Power	Permissible frequency fluctuation					±5%
	Power supply system capacity		0.5		0.9		1.5	2.5
	(kVA) (*5)
Protective structure (JEM1030)					Enclosed type (IP20)
Cooling system					Self-cooling
Approximate mass (kg (lbs))			0.6		0.7		0.9	1.6
			(1.32)		(1.54)		(1.98)	(3.52)

*1. The applied motor capacity indicated is the maximum capacity applicable when a Mitsubishi 4-pole standard motor is used.

*2. The rated output capacity indicated assumes that the output voltage is 230V.

*3. The % value of the overload current rating indicates the ratio of the overload current to the inverter's rated output current.

For repeated duty, allow time for the inverter to return to or below the temperatures under 100% load.

*4. For single-phase 100V power input, the output voltage provided cannot be twice or more than the power supply voltage.

*5. The power supply capacity changes with the values of the power supply side inverter impedances (including those of the input reactor and cables).

*6. For single-phase 100V power input, the application of motor load reduces the output voltage about 10 to 15%. Therefore, the load must be reduced when a general-purpose motor is used.

172