Mitsubishi Electronics FR-S500 Func- Para- Indica Name Setting Range, Factory Refer, Setting To

Function (Parameter) list

The extended function parameters are made valid by setting "1" in Pr. 30 "extended function display selection". (For more detailed information on the way to set Pr. 30, refer to the instruction manual (basic).)

Func- Para- Indica-	Name	Setting Range	Minimum	Factory Refer	Cus-
tion meter tion			Setting	Setting To:	tomer
			Increments		Setting

Parameters 0 to 9 are basic function parameters.

		DC injection
	10	brake	0 to 120Hz	0.1Hz	3Hz	71
		operation
		frequency
	11	DC injection	0 to 10s	0.1s	0.5s	71
		brake
		operation time
	12	DC injection	0 to 15%	0.1%	6%	71
		brake voltage
	13	Starting	0 to 60Hz	0.1Hz	0.5Hz	72
		frequency
			0: For constant-torque
		Load pattern	loads,
	14		1: For variable-torque	1	0	73
		selection	loads,
			2: For vertical lift loads,
			3: For vertical lift loads
functions	16	acceleration/	0 to 999s	0.1s	0.5s	74
	15	Jog frequency	0 to 120Hz	0.1Hz	5Hz	74
		Jog
operation		deceleration	0: Forward rotation,
		rotation
		time
		RUN key
Standard	17	direction	1: Reverse rotation	1	0	74
	19			1V	- - -	65
		voltage	0 to 800V, 888, - - -
		selection
		Basefrequency
		Acceleration/
	20	deceleration	1 to 120Hz	0.1Hz	60Hz	67
		reference
		frequency
		Stall
	21	prevention	0 to 31, 100	1	0	75
		function
		selection
		Stall
	22	prevention	0 to 200%	1%	150%	77
		operation
		level
		Stall
		prevention
	23	operation level	0 to 200%, - - -	1%	- - -	77
		compensation
		factor at
		double speed

Parameter List

2

FUNCTIONS

49