Mitsubishi Electronics FR-S500 PU contrast adjustment n15, Setting, During stop, During operation

Parameter unit (FR-PU04) setting

2.16.3 PU contrast adjustment (n15 )

By setting the communication parameter n15 "PU contrast adjustment", you can adjust the LCD contrast of the parameter unit (FR-PU04). When using the FR-

PU04, adjust the numerical value to any darkness with the / and define that brightness with the WRITE of the parameter unit.

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
n15 (991)	PU contrast adjustment	58	0 to 63 Setting is enabled when Pr. 30 = "1"

The parameter number in parentheses is the one for use with the parameter unit (FR- PU04).

CAUTION

When using the FR-PU04, you should press the WRITE to store the PU contrast setting value.

2.16.4 PU main display screen data selection (n16 )

You can choose the main display screen of the parameter unit (FR-PU04).

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
	PU main display
n16 (992)	screen data	0	0, 100 Setting is enabled when Pr. 30 = "1"
	selection

The parameter number in parentheses is the one for use with the parameter unit (FR- PU04).

<Setting>

When "100" is set in n16, the monitor value is different depending on whether the inverter is at a stop or running.

	0	n16	100
	During operation/stop	During stop	During operation
Output frequency	Output frequency	Set frequency	Output frequency
Output current		Output current
Alarm display		Alarm display

REMARKS

•During an error, the output frequency at error occurrence appears.

•During MRS, the values displayed are the same as during a stop.

♦Related parameters♦

•Speed display ⇒ Pr. 37 "speed display" (refer to page 81)

152