Mitsubishi Electronics FR-S500 instruction manual Setting, Frequency setting storage function

Additional function parameters

<Setting>

		Operation
Pr. 59 Setting	Remote setting function		Frequency setting storage
			function (E2PROM)
0	No		
1	Yes		Yes
2	Yes		No

•Use Pr. 59 to select whether the remote setting function is used or not and whether the frequency setting storage function* in the remote setting mode is used or not. When "remote setting function - yes" is selected, the functions of signals RH, RM and RL are changed to acceleration (RH), deceleration (RM) and clear (RL), respectively. Use Pr. 60 to Pr. 63 (input terminal function selection) to set the signals RH, RM, RL.

*Frequency setting storage function

This function stores the remotely-set frequency (frequency set by RH/RM operation) into memory.

When power is switched off once, then on, operation is resumed with that output frequency value. (Pr. 59="1")

96