Mitsubishi Electronics FR-S500 Jog operation Pr.15 , Pr.16, Using the FWD or REV

Explanation of functions (parameters)

2.3.10 Jog operation (Pr.15 , Pr.16 )

To start/stop jog operation in the external operation mode, choose the jog operation function in input terminal function selection, turn on the jog signal, and turn on/off the start signal (STF, STR).

You can choose the jog operation mode from the parameter unit (FR- PU04) and perform jog operation

using the FWD or REV .

Output frequency (Hz) Pr.20

Jog frequency setting range

Pr.15

JOG signal

STF signal

Forward rotation

Pr.16

ON

ON

(Can be read as the basic parameters when the FR-PU04 is connected.)

Set the frequency and acceleration/deceleration time for jog operation.

Parameter	Name	Factory Setting	Setting Range	Remarks
15	Jog frequency	5Hz	0 to 120Hz	Setting is enabled when
	Jog acceleration/
16		0.5s	0 to 999s	Pr. 30 = "1".
	deceleration time

CAUTION

•In S-shaped acceleration/deceleration pattern A, the acceleration/deceleration time is the period of time required to reach Pr. 3 "base frequency", not Pr. 20 "acceleration/deceleration reference frequency".

•The acceleration time and deceleration time cannot be set separately for jog operation.

•The Pr. 15 "Jog frequency" value should be equal to or higher than the Pr. 13 "starting frequency" setting.

•Assign the jog signal using any of Pr. 60 to Pr. 63 (input terminal function selection).

♦Related parameters♦

•Assignment of jog signal to terminal ⇒ Pr. 60 to Pr. 63 (input terminal function selection) (refer to page 98)

•Acceleration/deceleration pattern S-shaped acceleration/deceleration A

⇒Pr. 29 "acceleration/deceleration pattern" (refer to page 79)

2.3.11		RUN key rotation direction selection (Pr.17					)
	Used to choose the direction of rotation by operating the RUN key of the operation
	panel.
	Parameter	Name	Factory	Setting	Remarks
			Setting	Range
	17	RUN key rotation	0	0, 1	0: Forward rotation	Setting is enabled
		direction selection			1: Reverse rotation	when Pr. 30 = "1".

Refer to (page 65)

Refer to , (page 67)

74