ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 155
MODULES (FXO-4/8) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the module.
MODULES (FXO-4/8) > INFO > FIRMWARE REVISION
Read security: 5
Displays the current firmware revision of the selected module.
MODULES (FXO-4/8) > INFO > PROCESSOR ID
Read security: 5
Displays the processor ID of the selected module.
MODULES (FXO-4/8) > STATUS
Read security: 5
Displays the status of each of the FXO ports.
MODULES (FXO-4/8) > STATUS > PRT
Read security: 5
Indicates the port number. There are 4 available interfaces on the Quad FXO Option Module and 8 on the
Octal FXO Option Module.
MODULES (FXO-4/8) > STATUS > STATUS
Read security: 5
Displays the call status of each voice port. This field may display the following:
IDLE The FXO port is in an idle state for LS configurations, and tip is
grounded in GS configurations.
RING GROUND The FXO port has detected ring ground.
OFF HOOK The FXO port has detected an off hook condition (loop current flowing).
REVERSE BATTERY The FXO port has reversed T/R polarity.
RINGING The FXO port is detecting ringing condition on the interface.
TIP-OPEN The FXO port tip conductor is high impedance. This is an idle condition
for GS trunks.
UNKNOWN No information about the FXO port is available.
INACTIVE The port is preconfigured, but the FXO module is not present.
AVAILABLE The FXO port is present and available for use.
NOT AVAILABLE The FXO port is present, but not available for use.
DISABLED The FXO module is present, but the port is not mapped.
TEST This generic FXO port test indicator is used when multiple tests are being
run or the test is not a 2W test.