ADTRAN 1200305L1 system manual Modules Bonding Configuration Txdeq Timer SEC

ATLAS 550 System Manual Section 4, User Interface Guide

MODULES (BONDING) > CONFIGURATION > TXDEQ TIMER (SEC)

Write security: 3; Read security: 5

Specifies the length of time both endpoints attempt to equalize the network delay between the bearer channels before deciding the BONDING call has failed.

MODULES (BONDING) > CONFIGURATION > TANULL TIMER (SEC)

Write security: 3; Read security: 5

Specifies the length of time the answering endpoint attempts to detect the BONDING negotiation pattern from the originating endpoint before deciding the BONDING call has failed. It may be necessary to shorten this timer if the DTE equipment using the BONDING module also has timer constraints for completing non-BONDING parameter negotiation.

MODULES (BONDING) > CONFIGURATION > TCID TIMER (SEC)

Write security: 3; Read security: 5

Specifies the length of time both endpoints attempt to negotiate an agreeable value for bearer channels and channel capacities before deciding the BONDING call has failed.

MODULES (BONDING) > CONFIGURATION > CALL STAGGER

Write security: 3; Read security: 5

Specifies the amount of delay between placing calls for outgoing BONDING sessions. The following call stagger values are available:

NO STAGGER

500MS

1SEC.

2SEC.

There is no delay between the call dialing of a BONDING session.

Wait approximately ½ second between the call dialing of a BONDING session.

Wait approximately 1 second between the call dialing of a BONDING session.

Wait approximately 2 seconds between the call dialing of a BONDING session.

61200305L1-1F © 2002 ADTRAN, Inc. 189