ADTRAN 1200305L1 Remote device does not support frame relay signaling, Operates in NNI mode

ATLAS 550 System Manual Section 4, User Interface Guide

SIGNALING ROLE

Write security: 3; Read security: 5

Displays the frame relay signaling role for this packet endpoint. The following options indicate the signaling role of this packet endpoint.

OFF	The remote device does not support frame relay signaling.
AUTO	Detects the role of the device on the other end of the circuit and
	automatically sets this packet endpoint to the appropriate value.
BOTH	Operates in NNI mode.
NETWORK	Acts as the network side of the UNI interface.
USER	Acts as the user side of the UNI interface.

SIGNALING TYPE

Write security: 3; Read security: 5

Displays the frame relay signaling type for this packet endpoint. The following options indicate the signaling type for this packet endpoint.

AUTO	Detects the signaling type of the device on the other end of the circuit
	and automatically sets this packet endpoint to the same signaling type.
ANNEX A	Transmits and responds to ITU-T Q.933-A standards.
ANNEX D	Transmits and responds to ANSI T1.617-D standards.
LMI	Transmits and responds to Group of Four specifications.

USER POLL TIMER (T391)

Write security: 3; Read security: 5

Sets the polling interval to the network in seconds.

USER POLLS PER STATUS (N391)

Write security: 3; Read security: 5

Controls how many link integrity polls occur between full status polls.

USER BAD EVENT THRESHOLD (N392)

Write security: 3; Read security: 5

Sets the number of bad polling events that will cause the link to be declared down in N393 polls.

USER EVENT WINDOW SIZE (N393)

Write security: 3; Read security: 5

Defines the number of poll events in each monitored window.

For most applications, the USER POLL TIMER, USER POLLS PER STATUS, USER BAD EVENT

THRESHOLD, and USER EVENT WINDOW SIZE configuration parameters should be left in the default state. Use caution when changing these parameters.

61200305L1-1F © 2002 ADTRAN, Inc. 197