ADTRAN 1200305L1 VERIFYING COMMUNICATIONS OVER AN IP LAN

61200305L1-1F © 2002 ADTRAN, Inc. 325
VERIFYING COMMUNICATIONS OVER AN IP LAN
Introduction
When an ETHERNET port is connected to a local area network (LAN), test steps must be performed on the
ATLAS 550 to ensure that the unit is communicating properly over the network. This procedure outlines
those steps.
Prerequisite Procedures
Before beginning this procedure, the unit should be physically connected to the LAN and the provisioning
tasks detailed in DLP-003 should be complete.
Tools and Materials Required
• Access to a PC or other computer connected to the LAN
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, wear an antistatic discharge wrist strap to prevent damage to electronic
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.