Kenwood TM-V71A, TM-V71E Transceiver Reset, VFO Reset, PART Partial Reset, PM Reset, FULL Reset

TRANSCEIVER RESET

There are 4 types of transceiver reset available:

VFO Reset

Use to initialize the VFO and accompanying settings.

PART (Partial) Reset

Use to initialize all settings other than the Memory channels, the DTMF memory, and the PM channels.

PM Reset

Use to reset only the Programmable Memory channels to their default values.

FULL Reset

Use to initialize all transceiver settings that you have customized.

There are 2 ways to perform a reset on the transceiver: by key operation and by accessing Menu mode.

Key Operation:

1Turn the transceiver power OFF.

2Press [F] + Power ON.

3Rotate the Tuning control and select your desired reset type: VFO, PART, PM, or FULL.

4Press the Tuning control to set the reset type.

•A confirmation message appears on the display.

•Press [TONE] (BACK) to return to the previous display or [F] (ESC) to cancel the reset.

5Press the Tuning control again to perform the reset.

Note: When in Remote Control or Repeater mode, you cannot reset the transceiver using the Key Operation method.

87