Kenwood TM-V71E, TM-V71A Rear Panel, Sub-Panel, qANT, wDATA, rSP SP 1/ SP, qMIC, wPANEL

Rear Panel

qANT

Connect an M-type (TM-V71A) or N-type (TM-V71E) external antenna to this terminal {page 5}. When making test transmissions, connect a dummy load in place of the antenna. The antenna system or load should have an impedance of 50 Ω.

wDATA

Connect a TNC unit to this terminal, via a 6-pin mini DIN connector.

ePC

Connect a personal computer to this terminal, via an 8-pin mini DIN connector.

rSP (SP 1/ SP 2)

If desired, connect 1 or 2 external speakers for clearer audio. These jacks accept 3.5 mm (1/8") diameter, 2-conductor plugs {page 7}. Refer to page 71 to determine how the speakers will be used.

Sub-Panel

PANEL

MIC

qMIC

Connect the supplied microphone to this jack {page 7}.

wPANEL

When using an optional panel kit, attach the panel to this terminal using the cable that comes with the panel kit.

12