Kenwood TM-V71A, TM-V71E instruction manual Selecting a frequency band, Frequency ranges

SELECTING A frequency band

You can change the default frequency bands for bands A and B.

1Select band A or B by pressing the [BAND SEL] control or [PF2].

2Press [F], [BAND SEL] of your selected band.

•Each time you press [F], [BAND SEL], you cycle to the next frequency band.

•The default setting of the [PF1] key also allows you to cycle to the next frequency band.

•When masking a band {page 71}, you are restricted to using only the selectable band.

•When receiving 2 signals on the same band, the image interference, senstivity, etc., performance will decrease.

•Band A: 118 >> 144 (default) >> 220 >> 300 >> 430/440 (MHz).

•Band B: 144 >> 220 >> 300 >> 430/440 (default) >> 1200 (MHz).

Note:

uM4 type models do not have the following frequency bands available: 118, 220, 300, or 1200 (MHz).

uE and M4 type models use the 430 MHz band and K type models use the 440 MHz band.

Frequency ranges:

•118 MHz: 118 ~ 135.995 MHz

•144 MHz: 136 ~ 199.995 MHz

•220 MHz: 200 ~ 299.995 MHz

•300 MHz: 300 ~ 399.995 MHz

•430/440 MHz: 400 ~ 523.995 MHz

•1200 MHz: 800 ~ 1299.995 MHz (excluding cellular band)

17