3Rotate the Tuning control to select a group to link.
4Press the Tuning control to set the group and move the cursor to the right.
•Press [REV] (
) to move the cursor back or [LOW] (
) to move the cursor to the right.
5Repeat steps 3 and 4 to link additional groups together.
6When you have entered your desired groups, press [LOW] (
) to move the cursor to the right, then press the Tuning control to complete the entry and exit Menu mode.
•If you have entered the maximum of 6 groups, simply press the Tuning control to complete the entry and exit Menu mode.
PROGRAM SCAN
Program Scan is identical to VFO Scan except that you select a frequency range for the scan.
nSetting Scan Limits
You can store up to 10 scan ranges in Memory channels L0/U0 to L9/U9.
1 Select your desired band.
2 Press [VFO].
3 Rotate the Tuning control to select your desired frequency for the lower limit.
4Press [F].
•A memory channel number appears and blinks.
5Rotate the Tuning control to select a channel from L0 to L9.
6Press [MR] to set the channel number.
•The lower limit is stored in the channel.
7Rotate the Tuning control to select your desired frequency for the lower limit.
46
